Email this article Study of the Inner Phase Interface Structure in an Indium Freezing Fixed Point Cell
- Authors: Ivanova A.G.1, Pokhodun A.I.1, Gerasimov S.F.1, Fuksov V.M.1
-
Affiliations:
- Mendeleev All-Russia Research Institute of Metrology (VNIIM)
- Issue: Vol 59, No 1 (2016)
- Pages: 75-79
- Section: Article
- URL: https://journals.rcsi.science/0543-1972/article/view/245717
- DOI: https://doi.org/10.1007/s11018-016-0920-6
- ID: 245717
Cite item
Open Access
Access granted
Subscription Access
Abstract
Methods are considered for initiation of the inner interface between metal liquid and solid phases. The dependence of structure and temperature in an indium fixed point cell on initiation method is studied. Estimates are obtained for the density of heat flow with different inner boundary initiation methods. Optimum initiation conditions are determined in order to exclude undesirable thermal connections between a thermometer channel and cell walls.
Keywords
About the authors
A. G. Ivanova
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Author for correspondence.
Email: A.G.Ivanova@vniim.ru
Russian Federation, St. Petersburg
A. I. Pokhodun
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Email: I.F.Gerasimov@vniim.ru
Russian Federation, St. Petersburg
S. F. Gerasimov
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Author for correspondence.
Email: I.F.Gerasimov@vniim.ru
Russian Federation, St. Petersburg
V. M. Fuksov
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Email: I.F.Gerasimov@vniim.ru
Russian Federation, St. Petersburg
