Properties of Composites with Calcium Phosphate Filled Polymer Matrix, Obtained Using Stereolithographic Printing for Ceramic Materials with Prescribed Pore-Space Architecture

S. A. Tikhonova; P. V. Evdokimov; T. V. Safronova; V. I. Putlyaev

doi:10.1007/s10717-019-00136-z

Properties of Composites with Calcium Phosphate Filled Polymer Matrix, Obtained Using Stereolithographic Printing for Ceramic Materials with Prescribed Pore-Space Architecture

Autores: Tikhonova S.A.¹, Evdokimov P.V.¹, Safronova T.V.¹, Putlyaev V.I.¹
Afiliações:
1. M. V. Lomonosov Moscow State University
Edição: Volume 76, Nº 1-2 (2019)
Páginas: 77-81
Seção: Biomaterials
URL: https://journals.rcsi.science/0361-7610/article/view/245166
DOI: https://doi.org/10.1007/s10717-019-00136-z
ID: 245166

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

The process of removing an organic component from composites (photopolymer/calcium phosphate) with complex architecture, which are obtained by 3D-printing in order to create personalized bioceramic implants, was studied. Ceramic materials with complex pore-space organization were obtained by stereolithographic printing. It is shown that the degree of polymerization of the composite influences the final density of the calcium phosphate ceramic materials with complex architecture.