Enviar artigo por via de e-mail Prospects for Using Different Types of Transparencies in the Manufacture of Aircraft Canopies (Review)
- Autores: Mekalina I.V.1, Yakovlev N.O.1, Kharitonov G.M.2, Khitrova O.I.2
-
Afiliações:
- All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
- M. M. Gromov Flight-Research Institute
- Edição: Volume 74, Nº 9-10 (2018)
- Páginas: 367-371
- Seção: At Enterprises and Institutes
- URL: https://journals.rcsi.science/0361-7610/article/view/245070
- DOI: https://doi.org/10.1007/s10717-018-9996-6
- ID: 245070
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The prospects for using aircraft transparency parts based on silicate, organic, or polycarbonate glasses from the standpoint of strength, the primary sources of loading, and the most vulnerable locations are reviewed. Suggestions for increasing their strength reliability are described.
Sobre autores
I. Mekalina
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Autor responsável pela correspondência
Email: glass627@viam.ru
Rússia, Moscow
N. Yakovlev
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Email: glass627@viam.ru
Rússia, Moscow
G. Kharitonov
M. M. Gromov Flight-Research Institute
Email: glass627@viam.ru
Rússia, Zhukovskii, Moscow Oblast
O. Khitrova
M. M. Gromov Flight-Research Institute
Email: glass627@viam.ru
Rússia, Zhukovskii, Moscow Oblast
Arquivos suplementares
