Quality of agricultural machinery and control of its manufacture and repair
- Authors: Leonov O.A1, Bondareva G.I1, Shkaruba N.Z.1, Vergazova Y.G1
-
Affiliations:
- Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural Academy
- Issue: Vol 83, No 3 (2016)
- Pages: 30-32
- Section: Articles
- URL: https://journals.rcsi.science/0321-4443/article/view/66142
- DOI: https://doi.org/10.17816/0321-4443-66142
- ID: 66142
Cite item
Full Text
Abstract
The article considers the factors influencing on the quality of manufacture and repair of agricultural machinery from the perspective of application of one of the newest methods of the quality analysis known as Principle of 5 M - men, methods, materials, machines, measures. It is defined that in all five indices the domestic agricultural machinery considerably lags behind the foreign one. The main reasons are the use of cheap raw materials, the lack of modern processing equipment with high precision, the lack of highly skilled and highly paid workers, the designing of machines by means of archaic methods, the small degree of information support on modern technologies and specifics of branch machinery, especially internationally. The role of control in formation of quality of manufacture and repair of agricultural machinery is highlighted. The purchasing manager of a large repair enterprise has to provide in the contract for delivery of incoming production the conditions on the presence of a defined limit of defects with selective check of incoming consignment. For a small enterprise, there is the simple recommendation to take a technical documentation and instruments of control along when going on a warehouse for spares, and to buy only good products of manufacturer or well-established similar products. The main objectives of metrological service in repair enterprises are defined. Modern metrological provision during machine repair is the system ensuring the quality of control that includes: the strict ensuring unity of measurements; the choice of critical control points, which are subject to rigid control; the feasibility study of choice of measuring instruments by criteria of minimization of costs and losses for controlled products; the regular actions on adjustment of measuring instruments, the tests and control during maintenance and repair of agricultural machinery.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
O. A Leonov
Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural AcademyDSc in Engineering Moscow, Russia
G. I Bondareva
Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural Academy
Email: msau.l@ya.ru
DSc in Engineering Moscow, Russia
N. Zh Shkaruba
Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural AcademyPhD in Engineering Moscow, Russia
Yu. G Vergazova
Russian State Agrarian University - Moscow K.A. Timiryazev Agricultural AcademyEngineer Moscow, Russia
References
- Ерохин М.Н., Леонов О.А. Особенности обеспечения качества ремонта сельскохозяйственной техники на современном этапе // Вестник ФГОУ ВПО МГАУ. 2005, №1. С. 9-12.
- Леонов О.А., Селезнева Н.И. Технико-экономический анализ состояния технологического оборудования на предприятиях технического сервиса в агропромышленном комплексе // Вестник ФГОУ ВПО МГАУ. 2012, №5. С. 64-67.
- Бондарева Г.И. Основы надежности технических систем: Учеб. пособие. М.: Изд-во МГАУ, 2008. 173 с.
- Леонов О.А., Шкаруба Н.Ж. Алгоритм выбора средств измерений для контроля качества по технико-экономическим критериям // Вестник ФГОУ ВПО МГАУ. 2012, №2. С. 89-91.
- Леонов О.А., Темасова Г.Н. Организация системы контроля затрат на качество на предприятиях технического сервиса АПК // Вестник ФГОУ ВПО МГАУ. 2009, № 8-1. С. 56-59.
- Леонов О.А., Шкаруба Н.Ж. Расчет затрат на контроль технологических процессов ремонтного производства // Вестник ФГОУ ВПО МГАУ. 2004, №5. С. 75-77.
- Леонов О.А., Темасова Г.Н. Методология оценки затрат на качество для предприятий // Вестник ФГОУ ВПО МГАУ. 2007, №5. С. 23-27.
- Леонов О.А., Темасова Г.Н. Процессный подход при расчете затрат на качество для ремонтных предприятий // Вестник ФГОУ ВПО МГАУ. 2007, №2. С. 94-98.
- Бондарева Г.И. Метрологическое обеспечение контроля деталей на машинно-технологических станциях: Учеб. пособие. М.: Изд-во МГАУ, 2007. 120 с.
- Бондарева Г.И. Системный анализ объектов, функций и ресурсов в процессах восстановления деталей машин // Вестник ФГОУ ВПО МГАУ. 2010, №2. С. 119-124.