Enviar artigo por via de e-mail Fundamentals and Some Results of Numerical Modeling the Cylinder-Piston Group Jet-Oil Supply in a High-speed Four-Stroke Internal Combustion Engine
- Autores: Putintsev S.1, Anikin S.2, Strelnikova S.3
-
Afiliações:
- Bauman Moscow State Technical University, 105005, Moscow, Russia
- Zhukov Military Academy of Air and Space Defense, 170022, Tver, Russia
- Mechanical Engineering Research Institute of the Russian Academy of Sciences, 101990, Moscow, Russia
- Edição: Nº 3 (2023)
- Páginas: 89-99
- Seção: АВТОМАТИЗАЦИЯ И УПРАВЛЕНИЕ В МАШИНОСТРОЕНИИ
- URL: https://journals.rcsi.science/0235-7119/article/view/137591
- DOI: https://doi.org/10.31857/S023571192303015X
- EDN: https://elibrary.ru/PQUTRI
- ID: 137591
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Scientific substantiation of the design and simulation techniques for one of the understudied aspects of oil supply, namely, jet supply of engine oil from the gaps of the rotating journal bearing to the “cylinder–piston” pairing of a high-speed four-stroke universal diesel engine, is given. The simulation resulted in visualization of the trajectory and zones of oil ingress on the friction surfaces of parts of the cylinder–piston group presented in this article, as well as a quantitative assessment of the oil volume in these zones and in the crankcase. The simulation technique and the results of its application can be of both scientific and practical interest for specialists in the field of lubrication design and reliability of piston machines.
Palavras-chave
Sobre autores
S. Putintsev
Bauman Moscow State Technical University, 105005, Moscow, Russia
Email: sofya.s.strelnikova@yandex.ru
Россия, Москва
S. Anikin
Zhukov Military Academy of Air and Space Defense, 170022, Tver, Russia
Email: sofya.s.strelnikova@yandex.ru
Россия, Тверь
S. Strelnikova
Mechanical Engineering Research Institute of the Russian Academy of Sciences, 101990, Moscow, Russia
Autor responsável pela correspondência
Email: sofya.s.strelnikova@yandex.ru
Россия, Москва
Bibliografia
- Bedajangam S.K., Jadhav N.P. Friction losses between piston ring-liner assembly of internal combustion engine: A review // Int. J. of Scientific and Research Publications. 2013. V. 3. № 6. C. 1.
- Heywood J.B. Internal combustion engine fundamentals, Second Edition. New York: McGraw-Hill Education, 2018. 1056 p.
- Ganesan V. Internal combustion engines. New York: McGraw Hill Education, 2012. 573 p.
- Coy R.C. Practical applications of lubrication models in engines // Tribology Int. 1998. V. 31. № 10. P. 563.
- Путинцев С.В., Агеев А.Г. Экспериментальное исследование условий маслоснабжения цилиндра быстроходного четырехтактного двигателя внутреннего сгорания // Тракторы и сельхозмашины. 2016. Т. 83. № 10. С. 45.
- Pulkrabek W.W. Engineering fundamentals of the internal combustion engine // J. Eng. Gas Turbines Power. 2004. V. 126. № 1. P. 198.
- Xiaohua X. Influence of piston-bore clearance on second motion characteristics of piston and skirt wear // Mechanics and Industry. 2019. V. 20. № 2. P. 205.
- Delprete C., Razavykia A. Piston dynamics, lubrication and tribological performance evaluation: A review // Int. J. of Engine Research. 2020. V. 21. № 5. P. 725.
- Damaged pistons. How to identify and eliminate them [Электронный ресурс] // Technical brochure MS Motor Service International GmbH [2006] URL: https://www.ms-motorservice.com/en/technical-know-how/technical-information/ (дата обращения: 21.07.2022)
- Cameron A. Basic Lubrication Theory. London: Ellis Horwood Ltd., 1981. 256 p.
- Singh S.K., Singh S., Sehgal A.K. Impact of low viscosity engine oil on performance, fuel economy and emissions of light duty diesel engine // Conference: SAE 2016 Int. Powertrains, Fuels & Lubricants Meeting. October 17, 2016. Technical Paper, 2016-01-2316. https://doi.org/10.4271/2016-01-2316
Arquivos suplementares
