Application of the parameters of the remagnetization curve`s spectral characteristics to determine the hardness of ferromagnetic material

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The paper discusses the results of the practical application of the harmonic components obtained in the analysis of the magnetic hysteresis loop to determine the hardness of steel. The magnetic characteristics of steel, including the magnetic hysteresis loop, were determined using a DIUS-1.15M magnetic structureoscope. Using the group method of data handling by the value of odd harmonic components, a complex parameter was detected. The weighting coefficients of the influence of harmonic components on the value of the complex parameter were determined. By the example of considering the dependences of coercive force, residual induction and the complex parameter obtained by the method of group argument accounting on the Brinell hardness of the material, it is shown that the complex parameter can be used to determine the hardness with the smallest error.

作者简介

R. Sokolov

Industrial University of Tyumen

Email: falcon.rs@mail.ru
Tyumen, Russia

K. Muratov

Industrial University of Tyumen

Email: muratovkr@tyuiu.ru
Tyumen, Russia

V. Novikov

Industrial University of Tyumen

Tyumen, Russia

参考

  1. Ничипурук А.П., Сташков А.Н., Костин В.Н., Муриков С.А., Муриков Е.С. Коэрцитиметрический контроль качества стальных деталей. Уральская школа коэрцитиметрии // В мире неразрушающего контроля. 2015. Т. 18. № 4. С. 9-13.
  2. Костин В.Н., Василенко О.Н., Бызов А.В. Мобильная аппаратно-программная система магнитной структуроскопии DIUS-1.15M // Дефектоскопия. 2018. № 9. С. 47-53.
  3. Соколов Р.А., Новиков В.Ф., Муратов К.Р. Патент № 2777695 C1 Российская Федерация, МПК G01N 17/00. Способ оценки стойкости сталей и сплавов к коррозии. № 2021132922. Заявл. 12.11.2021. Опубл. 08.08.2022.
  4. Sokolov R., Novikov V., Muratov K. Application of magnetic hysteresis loop for analysis of corrosion properties of steel // AIP Conference Proceedings. 2020. V. 2313. P. 060017.
  5. Баласанян С.Ш., Геворгян Э.М. Сравнительный анализ методов регрессии и метода группового учета аргументов при моделировании процессов переработки полезных ископаемых // Известия Томского политехнического университета. Инжиниринг георесурсов. 2016. Т. 327. № 4. С. 23-34.
  6. Аузин А.А., Муравина О.М. Статистический анализ данных каротажа методом группового учета аргументов // Вестник Воронежского государственного университета. Серия: Геология. 2010. № 2. С. 219-224.

版权所有 © Russian Academy of Sciences, 2023

##common.cookie##