Enviar artigo por via de e-mail Analysis of methods for calculating the module of elasticity during dynamic instrumental indentation
- Autores: Gogolinskii K.1, Umanskii A.2, Golev A.3, Doronin K.2, Tomsky K.4
-
Afiliações:
- NRC “Kurchatov Institute” — PINP
- Saint Petersburg Mining University
- OOO«CONSTANTA»
- TKA Scientific Instruments LLC
- Edição: Nº 7 (2024)
- Páginas: 72-76
- Seção: По материалам XXXV Уральской конференции «Физические методы неразрушающего контроля (Янусовские чтения)»
- URL: https://journals.rcsi.science/0130-3082/article/view/262270
- DOI: https://doi.org/10.31857/S0130308224070098
- ID: 262270
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The results of a comparative analysis of three methods for calculating the elastic modulus during dynamic instrumental indentation are presented: in accordance with GOST R 56474, GOST R 8.748 and the proposed original method based on data from optical analysis of the indentation using prepared samples of alloys 20Х25Н20С2, 20Х23Н18 and BrANZhNMts9-4-4- 1.
Sobre autores
K. Gogolinskii
NRC “Kurchatov Institute” — PINP
Autor responsável pela correspondência
Email: nanoscan@yandex.ru
Rússia, 188300 Gatchina, m-rayon Orlova roshcha, 1
A. Umanskii
Saint Petersburg Mining University
Email: refreshermd@gmail.com
Rússia, 199106 St Petersburg, 21st Line, 2
A. Golev
OOO«CONSTANTA»
Email: artemgolev1999@gmail.com
Rússia, 198097 St Petersburg, Ogorodnyj pereulok, 21
K. Doronin
Saint Petersburg Mining University
Email: doronin.k.i@mail.ru
Rússia, 199106 St Petersburg, 21st Line, 2
K. Tomsky
TKA Scientific Instruments LLC
Email: tka46@mail.ru
Rússia, 192289 St Petersburg, Freight passage, 33
Bibliografia
- Kren A.P., Protasenya T.A. Determination of the physic and mechanical characteristics of isotropic pyrolitic graphite by dynamic indentation method // Defectoskopya. 2014. No. 7. C. 51—59.
- Umanskii A.S., Gogolinskii K.V., Syasko V.A., Golev A.S. Modification of the Leeb Impact Device for Measuring Hardness by the Dynamic Instrumented Indentation Method // Inventions. 2022. V. 7. doi: 10.3390/inventions7010029
- GOST R 8.748—2011 (ISO 14577-1:2002) Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method.
- GOST R 56474—2015. Space systems. Non-destructive testing of physics and mechanical properties of space technique’s materials and coatings by dynamic indentation. General requirements.
- GOST R 8.969—2019 State system for ensuring the uniformity of measurements. Metals and alloys. Leeb hardness test. Part 1: Test method.
Arquivos suplementares
