Email this article TECHNIQUE FOR AUTOMATIC GRADUATION AND VERIFICATION OF TWO-PARAMETER EDDY-CURRENT THICKNESS GAUGES OF DIELECTRIC COATINGS
- Authors: Syasko M.V1, Soloviev I.P1, Solomenchuk P.V2
-
Affiliations:
- St. Petersburg State University
- JSC «CONSTANTA»
- Issue: No 6 (2024)
- Pages: 58-62
- Section: По материалам XXXV Уральской конференции «Физические методы неразрушающего контроля (Янусовские чтения)»
- URL: https://journals.rcsi.science/0130-3082/article/view/259867
- DOI: https://doi.org/10.31857/S0130308224060069
- ID: 259867
Cite item
Open Access
Access granted
Subscription Access
Abstract
The article describes the non-conductive coating thickness simulating system, designed for automatic graduation of the coating thickness gauge using a large number of graduation points. The accuracy of the non-conductive coating thickness simulating system has been evaluated. The procedure for graduation of the coating thickness gauge is described, taking into account the design features and ways to compensate for the main sources of errors of the non-conductive coating thickness simulating system.
Keywords
About the authors
M. V Syasko
St. Petersburg State University
Email: m.syasko@gmail.com
St. Petersburg, Russia
I. P Soloviev
St. Petersburg State University
Email: i.soloviev@spbu.ru
St. Petersburg, Russia
P. V Solomenchuk
JSC «CONSTANTA»
Email: pavel257@mail.ru
St. Petersburg, Russia
References
- ГОСТ Р ИСО 2360—2021 Неэлектропроводящие покрытия на немагнитных электропроводящих металлических основаниях. Измерение толщины покрытия. Амплитудный вихретоковый метод.
- Syasko M., Solomenchuk P., Soloviev I., Ampilova N. A technique for multi-parameter signal processing of an eddy-current probe for measuring the thickness of non-conductive coatings on non-magnetic electrically conductive base metals // Appl. Sci. 2023. V. 13. P. 5144. https://doi.org/10.3390/app13085144
- GOST R ISO 2360—2021 Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method.
- Syasko M., Solomenchuk P., Soloviev I., Ampilova N. A technique for multi-parameter signal processing of an eddy-current probe for measuring the thickness of non-conductive coatings on non-magnetic electrically conductive base metals // Appl. Sci. 2023. V. 13. P. 5144. https://doi.org/10.3390/app13085144
