Kinetics of the Oxidation of Zn55Al Alloy with Molybdenum in the Solid State

Sh. G. Radjabova; Раджабова Ш. Г.; P. R. Ibrokhimov; Иброхимов П. Р.; I. N. Ganiev; Ганиев И. Н.; Z. R. Obidov; Обидов З. Р.

doi:10.31857/S0044453723020218

Kinetics of the Oxidation of Zn55Al Alloy with Molybdenum in the Solid State

Авторлар: Radjabova S.¹, Ibrokhimov P.¹, Ganiev I.¹, Obidov Z.¹
Мекемелер:
1. Nikitin Institute of Chemistry, National Academy of Sciences of Tajikistan
Шығарылым: Том 97, № 2 (2023)
Беттер: 237-240
Бөлім: ХИМИЧЕСКАЯ КИНЕТИКА И КАТАЛИЗ
URL: https://journals.rcsi.science/0044-4537/article/view/136515
DOI: https://doi.org/10.31857/S0044453723020218
EDN: https://elibrary.ru/EKJIGC
ID: 136515

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

Results are presented from studying the kinetics of oxidation of Zn55Al alloy with molybdenum in the solid state. Kinetic parameters of the oxidation of alloys in the 523–623 K range of temperatures are established. It is shown that the behavior of the alloys with a third component differs considerably from the one observed during the oxidation of the binary alloy, with molybdenum additives in amounts of 0.01–0.1 wt % greatly reducing the oxidizability of Zn55Al alloy. Protective films of oxides Al2O3, ZnO, ZnAl2O4, Al2O3·Mo2O3 form during the oxidation of hard alloys.

Негізгі сөздер

Zn55Al alloy, thermogravimetry, rate of oxidation, energy of activation, molybdenum

Әдебиет тізімі

Кечин В.А., Люблинский Е.Я. Цинковые сплавы. М.: Металлургия, 1986. 247 с.
Amini R.N., Irani M., Ganiev I., Obidov Z. // Orien. J. Chem. 2014. V. 30. № 3. P. 969. https://doi.org/10.13005/ojc/300307
Mazilkin A.A., Straumal B.B., Borodachenkova M.V. et al. // Mat. Lett. 2012. V. 84. P. 63. https://doi.org/10.1016/ j.matlet.2012.06.026
Obidov Z.R. // Russ. J. Appl. Chem. 2015. V. 88. № 9. P. 1451. https://doi.org/10.1134/S1070427215090116
Uesugi T., Takigawa Y., Kawasaki M., Higashi K. // Lett. on Mat. 2015. № 5 (3). P. 269. http://www.lettersonmaterials.com
Maniram S.G., Satender D., Manoj Sh., Upadhyay N.C. // IOSR J. Mech. and Civil Eng. 2013. V. 10. Issue 2. P. 39. http://www.iosrjournals.org
Obidov Z.R., Amonova A.V., Ganiev I.N. // Russ. J. Phys. Chem. A. 2013. V. 87. № 4. P. 702. https://doi.org/10.1134/S0036024413040201
Tuck C.D.S., Whitehead M.E., & Smallman R.E. // Corr. Sci. 1981. № 21 (5). P. 333. https://doi.org/10.1016/0010-938x(81)90071-8
Obidov Z.R. // Prot. of Met. and Phys. Chem. Surf. 2012. V. 48. № 3. P. 352. https://doi.org/10.1134/S2070205112030136
Baca R., Juárez G., Solache H. et al. // IOP Conf. Ser.: Mat. Sci. and Eng. 2010. (8). P. 012043. https://doi.org/10.1088/1757-899X/8/1/012043
Обидов З.Р., Ганиев И.Н. Анодное поведение и окисление сплавов систем Zn5Al–ЩЗМ и Zn55Al–ЩЗМ. Германия: LAP LAMBERT Acad. Publ., 2012. 288 с.
Васильев Е.К., Назмансов М.С. Качественный рентгеноструктурный анализ. Новосибирск: Наука, 1986. 200 с.