Local Turbulent Energy Dissipation Rate in an Agitated Vessel: Experimental and Turbulence Scaling
- Authors: Ditl P.1, Šulc R.1, Pešava V.1, Jašíkova D.2, Kotek M.2, Kopecký V.2, Kysela B.3
-
Affiliations:
- Faculty of the Mechanical Engineering, Department of Process Engineering
- Institute for Nanomaterials
- Institute of Hydrodynamics
- Issue: Vol 52, No 1 (2018)
- Pages: 122-134
- Section: Article
- URL: https://journals.rcsi.science/0040-5795/article/view/171949
- DOI: https://doi.org/10.1134/S0040579518010037
- ID: 171949
Cite item
Abstract
The hydrodynamics and the flow field in an agitated vessel were measured using 2-D time resolved particle image velocimetry (2-D TR PIV). The experiments were carried out in fully baffled cylindrical flat bottom vessels 300 and 400 mm in inner diameter. The 300 mm inner diameter tank was agitated by a Rushton turbine 100 mm in diameter, and the 400 mm inner diameter tank was agitated by a Rushton turbine 133 mm in diameter. Three liquids of different viscosities were used as the agitated liquid: (i) distilled water (ν = 9.35 × 10–7 m2/s), (ii) a 28 vol % aqueous solution of glycol (ν = 2 × 10–6 m2/s), and (iii) a 43 vol % aqueous solution of glycol (ν = 3 × 10–6 m2/s). The velocity fields were measured at an impeller rotation speed in the range from 300 to 850 rpm, which covers the Reynolds number range from 50000 to 189000. This means that fullydeveloped turbulent flow was reached. The experiments were performed to investigate the applicability of the following relations: ε* = ε/(u4/ν) = const, vK/u = const, Λ/ηK = const, τΛ/τK = const, ε* = ε/((Nd)4/ν) = const, Λ/d ∝ Re–1, ηK/d ∝ Re–1, vK/(Nd) = const, NτΛ ∝ R–1, NτK ∝ Re–1, and ε/(Nq) ∝ Re. These formulas were theoretically derived in our previous work, using turbulence theory, in particular, using turbulence spectrum analysis. The correctness of the proposed relations is investigated by statistical hypothesis testing.
About the authors
P. Ditl
Faculty of the Mechanical Engineering, Department of Process Engineering
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Prague, 166 07
R. Šulc
Faculty of the Mechanical Engineering, Department of Process Engineering
Author for correspondence.
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Prague, 166 07
V. Pešava
Faculty of the Mechanical Engineering, Department of Process Engineering
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Prague, 166 07
D. Jašíkova
Institute for Nanomaterials
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Liberec, 461 17
M. Kotek
Institute for Nanomaterials
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Liberec, 461 17
V. Kopecký
Institute for Nanomaterials
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Liberec, 461 17
B. Kysela
Institute of Hydrodynamics
Email: Radek.Sulc@fs.cvut.cz
Czech Republic, Prague, 166 12
Supplementary files
