期 |
栏目 |
标题 |
文件 |
卷 2016, 编号 1 (2016) |
Article |
Effect of the removal of the surface layer of a TRIP steel sheet on its phase composition after static tension at various strain rates |
|
卷 2016, 编号 4 (2016) |
Structure and Properties of the Deformed State |
Effect of the phase composition of the surface layer on the mechanical properties of 23Kh15N5AM3-Sh TRIP steel sheets |
|
卷 2016, 编号 4 (2016) |
Applied Problems of Strength and Plasticity |
Fatigue strength of low-activation ferritic–martensitic high-chromium EK-181 steel |
|
卷 2016, 编号 9 (2016) |
Article |
Mechanical properties of a nitrogen-bearing austenitic steel during static and cycle deformation |
|
卷 2016, 编号 10 (2016) |
Promising Materials and Technologies |
Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting |
|
卷 2016, 编号 10 (2016) |
Promising Materials and Technologies |
TRIP effect in austenitic–martensitic VNS9-Sh steel at various strain rates |
|
卷 2018, 编号 4 (2018) |
Advanced Materials and Technologies |
Effect of the Removal of a Surface Layer on the Mechanical Properties and the Static Stress–Strain Curves of an Austenitic–Martensitic Sheet TRIP Steel |
|
卷 2018, 编号 4 (2018) |
Applied Problems of Strength and Plasticity |
Behavior of an Austenitic–Martensitic VNS9-Sh Sheet TRIP Steel during Static and Cyclic Deformation |
|
卷 2019, 编号 4 (2019) |
Advanced Materials and Technologies |
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting |
|
卷 2019, 编号 4 (2019) |
Applied Problems of Strength and Plasticity |
Influence of a Zinc Coating on the Mechanical Properties of a Low-Carbon Steel Microalloyed with Niobium |
|