Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
- Авторы: Gerov M.1, Vladislavskaya E.1, Terent’ev V.2, Prosvirnin D.2, Antonova O.2, Kolmakov A.2
-
Учреждения:
- AO Corporation MIT
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- Выпуск: Том 2019, № 4 (2019)
- Страницы: 392-397
- Раздел: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173179
- DOI: https://doi.org/10.1134/S0036029519040098
- ID: 173179
Цитировать
Аннотация
The mechanical properties and the fracture mechanisms of the AlSi10Mg alloy fabricated by selective laser melting at various angles to the base are studied. The alloy is tested under static and cyclic deformation conditions. The samples grown at an angle of 45° to the base have the maximum time to failure, and the samples grown at an angle of 90° have the minimum time to failure. The samples grown at an angle of 45° have the maximum ultimate tensile strength and the yield strength.
Ключевые слова
Об авторах
M. Gerov
AO Corporation MIT
Автор, ответственный за переписку.
Email: zodom@mail.ru
Россия, Moscow, 127273
E. Vladislavskaya
AO Corporation MIT
Email: fatig@mail.ru
Россия, Moscow, 127273
V. Terent’ev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Автор, ответственный за переписку.
Email: fatig@mail.ru
Россия, Moscow, 119991
D. Prosvirnin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Россия, Moscow, 119991
O. Antonova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Россия, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Россия, Moscow, 119991
![](/img/style/loading.gif)