Мақаланы E-mail арқылы жіберу Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
- Авторлар: Gerov M.1, Vladislavskaya E.1, Terent’ev V.2, Prosvirnin D.2, Antonova O.2, Kolmakov A.2
-
Мекемелер:
- AO Corporation MIT
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- Шығарылым: Том 2019, № 4 (2019)
- Беттер: 392-397
- Бөлім: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173179
- DOI: https://doi.org/10.1134/S0036029519040098
- ID: 173179
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The mechanical properties and the fracture mechanisms of the AlSi10Mg alloy fabricated by selective laser melting at various angles to the base are studied. The alloy is tested under static and cyclic deformation conditions. The samples grown at an angle of 45° to the base have the maximum time to failure, and the samples grown at an angle of 90° have the minimum time to failure. The samples grown at an angle of 45° have the maximum ultimate tensile strength and the yield strength.
Негізгі сөздер
Авторлар туралы
M. Gerov
AO Corporation MIT
Хат алмасуға жауапты Автор.
Email: zodom@mail.ru
Ресей, Moscow, 127273
E. Vladislavskaya
AO Corporation MIT
Email: fatig@mail.ru
Ресей, Moscow, 127273
V. Terent’ev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Хат алмасуға жауапты Автор.
Email: fatig@mail.ru
Ресей, Moscow, 119991
D. Prosvirnin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Ресей, Moscow, 119991
O. Antonova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Ресей, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Ресей, Moscow, 119991
