Pesquisa

Edição
Título
Autores
Volume 2017, Nº 11 (2017)
Development of a Single-Crystal Fifth-Generation Nickel Superalloy
Petrushin N., Elyutin E., Visik E., Golynets S.
PDF
(Eng)
Volume 2016, Nº 11 (2016)
Properties of shaped castings made of modern cast VML18 and VML20 magnesium alloys manufactured by new methods
Leonov A., Duyunova V., Uridiya Z., Trofimov N.
PDF
(Eng)
Volume 2018, Nº 7 (2018)
Effect of the Thermomechanical Treatment Conditions on the Consolidation, the Structure, and the Mechanical Properties of Bulk Al–Mg–C Nanocomposites
Aborkin A., Alymov M., Sobol’kov A., Khor’kov K., Babin D.
PDF
(Eng)
Volume 2017, Nº 12 (2017)
Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades
Bondarenko Y., Echin A., Kolodyazhnyi M., Narskii A.
PDF
(Eng)
Volume 2016, Nº 13 (2016)
Development and research of a rhenium-free high-temperature nickel superalloy for the turbine rotor blades in aviation GTE
Shmotin Y., Logunov A., Leshchenko I., Danilov D.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Structure and High-Temperature Mechanical Properties of High-Carbon Niobium-Based Alloys
Karpov M., Prokhorov D., Vnukov V., Stroganova T., Gnesin B., Gnesin I., Zheltyakova I., Svetlov I.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Texture and Anisotropy of the Mechanical Properties of Magnesium Alloys
Betsofen S., Osintsev O., Grushin I., Petrov A., Speranskii K.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Effect of Aging on the Nanostructuring and Strength of a D16 Aluminum Alloy
Markushev M., Avtokratova E., Ilyasov R., Krymskiy S., Sitdikov O.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Effect of Some Impurities on the Structure, the Phase Composition, and the Properties of Magnesium Alloys Containing Rare-Earth Elements
Volkova E., Mostyaev I.
PDF
(Eng)
Volume 2017, Nº 11 (2017)
Estimation of the Ultimate Tensile Strength of Steel from Its HB and HV Hardness Numbers and Coercive Force
Sandomirskii S.
PDF
(Eng)
Volume 2017, Nº 7 (2017)
Dependence of the thermal transformations in the fines of the chromium ore of the Donskoy Ore Mining and Processing Plant on the addition of silicate and aluminosilicate fluxes
Zhdanov A., Kaplun L., Petrova S., Nurmaganbetova B., Glinkina K.
PDF
(Eng)
Volume 2016, Nº 13 (2016)
Determination of the hardness and the mechanical properties of steel during melting, secondary refining, and continuous casting in an arc-furnace shop
Shishimirov M., Kokhan L.
PDF
(Eng)
Volume 2019, Nº 10 (2019)
Fabrication, Structure, and Mechanical Properties of Composite Oxide Fibers for Brittle-Matrix Composites
Kiiko V., Kolchin A., Novokhatskaya N.
PDF
(Eng)
Volume 2019, Nº 4 (2019)
Basic Principles of Alloying and Treatment of High-Nitrogen Austenitic Corrosion-Resistant Steels
Bannykh I., Glezer A.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Physicomechanical Properties of Porous Zirconia Ceramics
Golovin Y., Korenkov V., Razlivalova S., Rodaev V.
PDF
(Eng)
Volume 2018, Nº 1 (2018)
Effect of Samarium on the Properties of Mg–Y–Gd–Zr Alloys
Luk’yanova E., Rokhlin L., Dobatkina T., Korol’kova I., Tarytina I.
PDF
(Eng)
Volume 2017, Nº 11 (2017)
Relation between the Hardness and the Strength of Gray Cast Iron with Allowance for the Structural Parameters
Baron A., Palatkina L.
PDF
(Eng)
Volume 2017, Nº 5 (2017)
Effect of addition of silicate and aluminosilicate fluxes on structure and phase composition of chromium sinter
Zhdanov A., Petrova S., Nurmaganbetova B., Zherebtsov D.
PDF
(Eng)
Volume 2019, Nº 9 (2019)
Effect of Preliminary Hydroabrasive Cutting on the Imperfection of Welded Joints and Their Mechanical Properties
Tabatchikova T., Morozova A., Gudnev N.
PDF
(Eng)
Volume 2019, Nº 1 (2019)
Effect of Cerium and Erbium on the Aging Kinetics and the Properties of an IMV7-1 Alloy of the Mg–Y–Gd–Zr System
Luk’yanova E., Dobatkina T., Tarytina I., Temralieva D., Ovchinnikova O., Rokhlin L.
PDF
(Eng)
Volume 2018, Nº 10 (2018)
Effect of the Deformation Axis Orientation on the Strength of Dislocation Junctions in FCC Single Crystals
Kurinnaya R., Zgolich M., Starenchenko V., Matveev M., Zgolich I., Shalygina T., Sadritdinova G.
PDF
(Eng)
Volume 2018, Nº 9 (2018)
Resistance of the Contact Welding Electrodes Made of a Cu–0.7% Cr–0.9% Hf Alloy with an Ultrafine-Grained Structure
Shan’gina D., Ivanov N., Bochvar N., Dobatkin S.
PDF
(Eng)
Volume 2017, Nº 4 (2017)
Study of the fracture kinetics in structural aluminum alloys subjected to a long-term action of a static load and a corrosive medium using specimens of a new type
Kablov E., Grinevich A., Lutsenko A., Erasov V., Nuzhnyi G., Gulina I.
PDF
(Eng)
Volume 2016, Nº 10 (2016)
Strength of freight bogie solebar fragments after volume–surface quenching
Nikulin S., Oguenko V., Rozhnov A., Turilina V., Nechaikina T., Rogachev S.
PDF
(Eng)
Volume 2019, Nº 12 (2019)
Effect of High-Temperature Coatings on the Reliability Characteristics of GTE Blade Elements
Abraimov N., Zolotareva A.
PDF
(Eng)
1 - 25 de 60 resultados 1 2 3 > >> 
Dicas:
  • Palavras-chave são sensíveis a maiúsculas
  • Preposições e conjunções ingleses são ignoradas
  • Busca é feita por todos os palavras-chave (agente AND experimentador) por omissão
  • Use OR para pesquisar um termo exato, ex.: educação OR formação
  • Use parênteses para criar frases complexas, ex.: arquivo de ((revistas OR conferências) NOT teses)
  • Para pesquisar uma frase precisa use aspas duplas, ex.: "investigações científicas"
  • Exclua uma palavra utilizando o sinal - (hífen) ou operador NOT; ex.: concurso-de beleza ou concurso NOT de beleza
  • Use * como caractere-coringa, ex.: científic* recuperará as palavras "científico", "científicos", etc.

Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies