Effect of Temperature on the Porosity of the Additive Products Made of the Dispersed Wastes of Cobalt–Chromium Alloys
- Autores: Latypov R.1, Ageev E.2, Altukhov A.2, Ageeva E.2
-
Afiliações:
- Moscow Polytechnic University
- Southwest State University
- Edição: Volume 2019, Nº 12 (2019)
- Páginas: 1300-1303
- Seção: Resource Saving
- URL: https://journals.rcsi.science/0036-0295/article/view/173771
- DOI: https://doi.org/10.1134/S0036029519120139
- ID: 173771
Citar
Resumo
The additive articles made from the powders fabricated by electric discharge dispersion of the wastes of cobalt–chromium alloys are studied. These articles are shown to have a fine-grained structure without inclusions and discontinuities, and their porosity decreases with increasing fusion temperature. An increase in the fusion temperature 120°C in the temperature range under study is found to decrease the porosity of the articles by a factor of 4.5.
Palavras-chave
Sobre autores
R. Latypov
Moscow Polytechnic University
Autor responsável pela correspondência
Email: latipov46@mail.ru
Rússia, Moscow, 115280
E. Ageev
Southwest State University
Email: latipov46@mail.ru
Rússia, Kursk, 305040
A. Altukhov
Southwest State University
Email: latipov46@mail.ru
Rússia, Kursk, 305040
E. Ageeva
Southwest State University
Email: latipov46@mail.ru
Rússia, Kursk, 305040
![](/img/style/loading.gif)