Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
- Autores: Gerov M.1, Vladislavskaya E.1, Terent’ev V.2, Prosvirnin D.2, Antonova O.2, Kolmakov A.2
-
Afiliações:
- AO Corporation MIT
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- Edição: Volume 2019, Nº 4 (2019)
- Páginas: 392-397
- Seção: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173179
- DOI: https://doi.org/10.1134/S0036029519040098
- ID: 173179
Citar
Resumo
The mechanical properties and the fracture mechanisms of the AlSi10Mg alloy fabricated by selective laser melting at various angles to the base are studied. The alloy is tested under static and cyclic deformation conditions. The samples grown at an angle of 45° to the base have the maximum time to failure, and the samples grown at an angle of 90° have the minimum time to failure. The samples grown at an angle of 45° have the maximum ultimate tensile strength and the yield strength.
Palavras-chave
Sobre autores
M. Gerov
AO Corporation MIT
Autor responsável pela correspondência
Email: zodom@mail.ru
Rússia, Moscow, 127273
E. Vladislavskaya
AO Corporation MIT
Email: fatig@mail.ru
Rússia, Moscow, 127273
V. Terent’ev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: fatig@mail.ru
Rússia, Moscow, 119991
D. Prosvirnin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Rússia, Moscow, 119991
O. Antonova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Rússia, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
Rússia, Moscow, 119991
![](/img/style/loading.gif)