Enviar artigo por via de e-mail Phase Composition, Texture, and Residual Stresses in Al–Cu–Li Friction Stir Welds
- Autores: Betsofen S.1, Lukin V.2, Dolgova M.1, Panteleev M.2, Kabanova Y.1
-
Afiliações:
- National Research University Moscow Aviation Institute
- FGUP VIAM
- Edição: Volume 2018, Nº 4 (2018)
- Páginas: 359-366
- Seção: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/172474
- DOI: https://doi.org/10.1134/S0036029518040031
- ID: 172474
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The formation of the phase composition, the texture, and the residual stresses in the V-1469 alloy joint (Al–Cu–Li system) fabricated by friction stir welding is studied. A numerical correlation between the phase composition, the hardness, and the residual stresses in various zones and sections of the welded joint is found
Palavras-chave
Sobre autores
S. Betsofen
National Research University Moscow Aviation Institute
Autor responsável pela correspondência
Email: s.betsofen@gmail.com
Rússia, Moscow, 125993
V. Lukin
FGUP VIAM
Email: s.betsofen@gmail.com
Rússia, Moscow, 105005
M. Dolgova
National Research University Moscow Aviation Institute
Email: s.betsofen@gmail.com
Rússia, Moscow, 125993
M. Panteleev
FGUP VIAM
Email: s.betsofen@gmail.com
Rússia, Moscow, 105005
Yu. Kabanova
National Research University Moscow Aviation Institute
Email: s.betsofen@gmail.com
Rússia, Moscow, 125993
