Effect of the phase composition of the surface layer on the mechanical properties of 23Kh15N5AM3-Sh TRIP steel sheets

V. F. Terent’ev; A. K. Slizov; D. V. Prosvirnin; V. P. Sirotinkin; A. A. Ashmarin; E. A. Eliseev; O. V. Rybal’chenko

doi:10.1134/S0036029516040212

Effect of the phase composition of the surface layer on the mechanical properties of 23Kh15N5AM3-Sh TRIP steel sheets

Autores: Terent’ev V.¹, Slizov A.², Prosvirnin D.¹, Sirotinkin V.¹, Ashmarin A.¹, Eliseev E.³, Rybal’chenko O.¹
Afiliações:
1. Baikov Institute of Metallurgy and Materials Science
2. OAO Kamov
3. All-Russia Institute of Aviation Materials VIAM
Edição: Volume 2016, Nº 4 (2016)
Páginas: 361-364
Seção: Structure and Properties of the Deformed State
URL: https://journals.rcsi.science/0036-0295/article/view/170480
DOI: https://doi.org/10.1134/S0036029516040212
ID: 170480

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Estatísticas

Resumo

The static and cyclic mechanical properties of cold-rolled corrosion-resistant VNS 9-Sh (23Kh15N5AM3-Sh) TRIP sheet steel from two batches having different deformation martensite contents in the surface layer are studied. An increase in the deformation martensite content is shown to cause an increase in the strength properties, a certain decrease in the plasticity, and an increase in the fatigue limit at 10⁷ cycles.