Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content

E. A. Eliseev; V. F. Terent’ev; N. M. Voznesenskaya; A. K. Slizov; V. P. Sirotinkin; A. S. Baikin; G. S. Seval’nev

doi:10.1134/S0036029517040036

Effect of the strain rate on the mechanical properties of a sheet TRIP steel with a high martensite content

Авторлар: Eliseev E.¹, Terent’ev V.², Voznesenskaya N.¹, Slizov A.², Sirotinkin V.², Baikin A.², Seval’nev G.¹
Мекемелер:
1. FGUP All-Russia Institute of Aviation Materials VIAM
2. Baikov Institute of Metallurgy and Materials Science
Шығарылым: Том 2017, № 4 (2017)
Беттер: 319-321
Бөлім: Diagnostics and Mechanical Test Techniques
URL: https://journals.rcsi.science/0036-0295/article/view/171447
DOI: https://doi.org/10.1134/S0036029517040036
ID: 171447

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Статистика

Аннотация

The laws of changing the mechanical properties of sheet austenitic–martensitic VNS9-Sh (23Kh15N5AM3-Sh) TRIP steel are studied when the static strain rate changes in the range 0.1–20 mm/min (8.3 × 10^–5–17 × 10^–3 s^–1). The 0.35-mm strip under study is characterized by a high martensite content (≈100%) in the surface layer at an average content of 80–85%. The transformation induced plasticity effect is maximal at a strain rate of 0.1 mm/min (8.3 × 10^–5 s^–1).