期 |
标题 |
文件 |
卷 2019, 编号 13 (2019) |
Low-Temperature Oxidation of Metals and Alloys for Processing Secondary Raw Materials into Chemical Products |
(Eng)
|
Pozhidaeva S., Ivanov A.
|
卷 2019, 编号 13 (2019) |
Technology of Borating Hardening of the Chaff-Cutter Drum Knives in a Grain Harvester Combine |
(Eng)
|
Lyalyakin V., Aulov V., Ishkov A., Trokhin A., Slinko D.
|
卷 2019, 编号 13 (2019) |
Key Differences between the Technology of Production of GTE Disk Blanks from Nickel Superalloy Granules and the Technology of Isothermal Deformation: A Review |
(Eng)
|
Volkov A., Karashaev M., Letnikov M., Bakradze M.
|
卷 2019, 编号 13 (2019) |
Near-Surface Layer during the Heterogeneous Heterophase Oxidation of Metals and Alloys and the Related Chemical and Technological Aspects |
(Eng)
|
Pozhidaeva S., Ivanov A.
|
卷 2018, 编号 13 (2018) |
Choice of a Medium for the Heat Treatment of Steels and Alloys |
(Eng)
|
Pomel’nikova A., Fetisov G.
|
卷 2018, 编号 13 (2018) |
Method of Electric Arc Furnace Dust Processing by Calcination with Lime with Following Alkaline Leaching |
(Eng)
|
Yakornov S., Panshin A., Grudinsky P., Dyubanov V., Leontiev L., Kozlov P., Ivakin D.
|
卷 2017, 编号 13 (2017) |
Formation of an Intermetallic Layer during Arc Facing of Aluminum Alloys onto a Steel Substrate |
(Eng)
|
Kovalev V., Mikheev R., Kobernik N., Galinovskiy A., Ershov I.
|
卷 2017, 编号 13 (2017) |
Causes of Cracking in Quenching of the Parts Made of Steels and Cast Iron and Recommendations for Their Removal: A Review |
(Eng)
|
Kuznetsov A., Rudnev V.
|
卷 2016, 编号 13 (2016) |
Structure formation in boron-rich iron–boron compounds |
(Eng)
|
Pomel’nikova A., Fetisov G., Zhuk V.
|
卷 2016, 编号 13 (2016) |
Next-generation casting technologies and their adaptation and development in Russia: I. at the beginning of a new technological paradigm |
(Eng)
|
Semenov A., Gavrilenko A., Semenov B.
|
卷 2016, 编号 13 (2016) |
Influence of preliminary oxidation on the subsequent nitriding |
(Eng)
|
Shestopalova L.
|
1 - 11 的 11 信息 |
|