| Issue |
Title |
File |
| Vol 2017, No 7 (2017) |
Flow stress of EK-181 steel as a function of the strain rate and the strain |
(Eng)
|
|
Kostyukhina A.V., Leont’eva-Smirnova M.V., Izmalkov I.N., Fedotov P.V., Loshmanov L.P.
|
| Vol 2017, No 7 (2017) |
Structure and properties of the layer deposited onto a low-carbon steel and then irradiated by an electron beam |
(Eng)
|
|
Kormyshev V.E., Gromov V.E., Ivanov Y.F., Konovalov S.V., Teresov A.D.
|
| Vol 2017, No 7 (2017) |
Structural features and properties of the laser-deposited nickel alloy layer on a KhV4F tool steel after heat treatment |
(Eng)
|
|
Shcherbakov V.S., Dikova T.D., Stavrev D.S.
|
| Vol 2017, No 7 (2017) |
Thermodynamics of the oxygen solutions in the aluminum-containing Ni–Co melts |
(Eng)
|
|
Aleksandrov A.A., Dashevskii V.Y., Leont’ev L.I.
|
| Vol 2017, No 7 (2017) |
Effect of the selective laser melting parameters on the structure–phase state of a ZhS6K-VI nickel superalloy |
(Eng)
|
|
Lukina E.A., Bazaleeva K.O., Petrushin N.V., Treninkov I.A., Tsvetkova E.V.
|
| Vol 2017, No 5 (2017) |
Finite element simulation of microindentation |
(Eng)
|
|
Zhuk D.I., Isaenkova M.G., Perlovich Y.A., Krymskaya O.A.
|
| Vol 2017, No 5 (2017) |
Primary radiation damage of an FeCr alloy under pressure: Atomistic simulation |
(Eng)
|
|
Tikhonchev M.Y., Svetukhin V.V.
|
| Vol 2017, No 5 (2017) |
Modifying ability of titanium-based pelleted master alloys |
(Eng)
|
|
Bazhin V.Y., Savchenkov S.A., Kosov Y.I.
|
| Vol 2017, No 5 (2017) |
Effect of the severe plastic deformation temperature on the diffusion properties of the grain boundaries in ultrafine-grained metals |
(Eng)
|
|
Chuvil’deev V.N., Myshlyaev M.M., Nokhrin A.V., Kopylov V.I., Lopatin Y.G., Pirozhnikova O.E., Piskunov A.V., Semenycheva A.V., Bobrov A.A.
|
| Vol 2017, No 5 (2017) |
Multilayer metallic material with specific properties and the technology of its production |
(Eng)
|
|
Grachev V.A., Rosen A.E., Perelygin Y.P., Rosen A.A.
|
| Vol 2017, No 5 (2017) |
Manufacture of NiAl-based rods for plasma centrifugal spraying using mechanochemical synthesis |
(Eng)
|
|
Logacheva A.I., Gusakov M.S., Sentyurina Z.A., Logachev I.A., Kandyba A.A.
|
| Vol 2017, No 5 (2017) |
Phase transitions during reducing roasting of a leucoxene concentrate with carbon |
(Eng)
|
|
Kop’ev D.Y., Anisonyan K.G., Goncharov K.V., Olyunina T.V., Sadykhov G.B.
|
| Vol 2017, No 5 (2017) |
Effect of addition of silicate and aluminosilicate fluxes on structure and phase composition of chromium sinter |
(Eng)
|
|
Zhdanov A.V., Petrova S.A., Nurmaganbetova B.N., Zherebtsov D.A.
|
| Vol 2017, No 5 (2017) |
Construction of viscosity diagrams for CaO–SiO2–Al2O3–8% MgO–4% B2O3 slags by the simplex lattice method |
(Eng)
|
|
Babenko A.A., Istomin S.A., Zhuchkov V.I., Sychev A.V., Ryabov V.V., Upolovnikova A.G.
|
| Vol 2017, No 5 (2017) |
Effect of liquid–solid pouring on the as-cast structure and the distribution of nonmetallic inclusions in a 24.2-t steel 38KhN3MFA ingot |
(Eng)
|
|
Rutskii D.V., Gamanyuk S.B., Zyuban N.A., Petrova V.F., Palatkina L.V.
|
| Vol 2017, No 5 (2017) |
Surface stresses in plastically deformed steels by X-ray diffraction |
(Eng)
|
|
Rozhnov A.B., Nikulin S.A., Shchetinin I.V., Shitkin S.L., Rogachev S.O.
|
| Vol 2017, No 3 (2017) |
Measurement of the electrical resistivity of liquid 32G2 and 32G1 steels by the rotating magnetic field method |
(Eng)
|
|
Borovykh M.A., Chikova O.A., Tsepelev V.S., V’yukhin V.V.
|
| Vol 2017, No 3 (2017) |
Experimental investigation of the acoustic properties and the microhardness of U8 steel |
(Eng)
|
|
Roshchupkin V.V., Lyakhovitskii M.M., Pokrasin M.A., Minina N.A.
|
| Vol 2017, No 3 (2017) |
Effect of modification on the solidification of Al–Si aluminum alloys |
(Eng)
|
|
Petrov I.A., Berezhnoi D.V., Ryakhovskii A.P., Moiseev V.S.
|
| Vol 2017, No 3 (2017) |
Technique of determining the parameters of rapid strengthening of an aluminum alloy during hot rolling |
(Eng)
|
|
Loginov Y.N., Golovnin M.A.
|
| Vol 2017, No 3 (2017) |
Effect of dysprosium on the kinetics and structural transformations during the decomposition of the supersaturated solid solution in magnesium–samarium alloys |
(Eng)
|
|
Rokhlin L.L., Luk’yanova E.A., Tabachkova N.Y., Dobatkina T.V., Tarytina I.E., Korol’kova I.G.
|
| Vol 2017, No 3 (2017) |
Solid-state oxidation kinetics of an yttrium-containing AK1M2 alloy |
(Eng)
|
|
Berdiev A.E., Ganiev I.N., Niezov K.K.
|
| Vol 2017, No 3 (2017) |
Interaction of niobium and tungsten monocarbides in molten copper |
(Eng)
|
|
Bodrova L.E., Fedorova O.M., Shubin A.B., Pastukhov E.A.
|
| Vol 2017, No 3 (2017) |
Thermodynamic description of the interaction processes in the Cu–Ce–O system in the temperature range 1100–1300°C |
(Eng)
|
|
Samoilova O.V., Mikhailov G.G., Makrovets L.A., Trofimov E.A.
|
| Vol 2017, No 3 (2017) |
FCC → FCT martensitic transformation in two-phase Mn–Cu alloys |
(Eng)
|
|
Nosova G.I.
|
| 276 - 300 of 453 Items |
<< < 7 8 9 10 11 12 13 14 15 16 > >>
|
