Effect of an isothermal action on the functional properties and the shape memory effect parameters of a TiNi(Mo, V) alloy
- Authors: Marchenko E.S.1, Baigonakova G.A.1, Gunther V.E.1, Chekalin T.L.1
-
Affiliations:
- Tomsk State University
- Issue: Vol 2017, No 4 (2017)
- Pages: 267-270
- Section: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/171402
- DOI: https://doi.org/10.1134/S0036029517040140
- ID: 171402
Cite item
Abstract
The influence of annealing at 450°C for 1 h on the shape memory effect parameters of the Ti50Ni48.7V1Mo0.3 alloy is studied over a wide temperature range at a constant load. Annealing is shown to decrease the critical stresses of the martensitic shear, to increase the temperature hysteresis wide during a repeated shape memory effect, and to decrease this effect.
About the authors
E. S. Marchenko
Tomsk State University
Email: gat27@mail.ru
Russian Federation, pr. Lenina 36, Tomsk, 634050
G. A. Baigonakova
Tomsk State University
Author for correspondence.
Email: gat27@mail.ru
Russian Federation, pr. Lenina 36, Tomsk, 634050
V. E. Gunther
Tomsk State University
Email: gat27@mail.ru
Russian Federation, pr. Lenina 36, Tomsk, 634050
T. L. Chekalin
Tomsk State University
Email: gat27@mail.ru
Russian Federation, pr. Lenina 36, Tomsk, 634050