| 期 |
标题 |
文件 |
| 卷 120, 编号 12 (2019) |
Mechanical Properties of the Al–Zn–Mg–Fe–Ni Alloy of Eutectic Type at Different Strain Rates |
(Eng)
|
|
Petrova A., Brodova I., Razorenov S., Shorokhov E., Akopyan T.
|
| 卷 120, 编号 12 (2019) |
Deformation and Fracture of 13CrMoNbV Ferritic-Martensitic Steel at Elevated Temperature |
(Eng)
|
|
Churyumov A.
|
| 卷 120, 编号 12 (2019) |
Formation of the Structural State of a High-Strength Low-Alloy Steel upon Hot Rolling and Controlled Cooling |
(Eng)
|
|
Urtsev V., Kornilov V., Shmakov A., Krasnov M., Stekanov P., Platov S., Mokshin E., Urtsev N., Schastlivtsev V., Razumov I., Gornostyrev Y.
|
| 卷 120, 编号 11 (2019) |
Hot Deformation Behavior of 6063 Aluminum Alloy Studied Using Processing Maps and Microstructural Analysis |
(Eng)
|
|
Yuanchun Huang ., Liu L., Xiao Z., Wang S.
|
| 卷 120, 编号 11 (2019) |
Effect of Multipass on Microstructure and Impact Toughness of As-Cast Al–20Si Alloy via Friction Stir Processing |
(Eng)
|
|
Yongjing Yang ., Hua P., Li X., Chen K., Zhou W.
|
| 卷 120, 编号 11 (2019) |
Vacancy Migration Energy in Steels and Alloys |
(Eng)
|
|
Kozlov A., Portnykh I., Asiptsov O.
|
| 卷 120, 编号 10 (2019) |
Modeling of Wear Behavior of Al–Si/Al2O3 Metal Matrix Composites |
(Eng)
|
|
Megahed M., Saber D., Agwa M.
|
| 卷 120, 编号 10 (2019) |
Effect of The Processes of Self-Tempering and Tempering on The Mechanical Characteristics and the Character of Fracture of Low-Carbon Martenstic Steel Quenched in Air |
(Eng)
|
|
Vorobev R., Dubinskii V., Evstifeeva V.
|
| 卷 120, 编号 10 (2019) |
Atomistic Modeling of Stacking Faults in Cementite. Planes Containing Vector [001] |
(Eng)
|
|
Kar’kina L., Kar’kin I.
|
| 卷 120, 编号 10 (2019) |
Mechanical and Thermomechanical Properties of the Ti50Pd40Ni10 Alloy with a High-Temperature Shape-Memory Effect Studied on a Workpiece in the Form of a Bar in the Annealed State |
(Eng)
|
|
Popov N., Presnyakov D., Lar’kin V., Suvorova E., Kostyleva A.
|
| 卷 120, 编号 10 (2019) |
The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy |
(Eng)
|
|
Kishchik A., Kotov A., Mikhaylovskaya A.
|
| 卷 120, 编号 10 (2019) |
Mechanisms of Superplastic High-Rate Deformation in the Al–Mg–Zn–Fe–Ni–Zr–Sc Alloy |
(Eng)
|
|
Yakovtseva O., Kotov A., Sitkina M., Irzhak A., Mikhaylovskaya A.
|
| 卷 120, 编号 10 (2019) |
Heat Criterion of the Change of Strain-Hardening Stages in Austenitic Stainless Steel |
(Eng)
|
|
Lunev A., Nadezhkin M.
|
| 卷 120, 编号 9 (2019) |
Influence of Mg on Micro-Mechanical Behaviour of as Cast Al–Mg System |
(Eng)
|
|
Panchal H., Rao V.
|
| 卷 120, 编号 9 (2019) |
The Effect of Deep Cryogenic Treatment on Microstructure and Wear Behavior of H11 Tool Steel |
(Eng)
|
|
Jalil Soleimany ., Ghayour H., Amini K., Gharavi F.
|
| 卷 120, 编号 9 (2019) |
Microstructure and Properties of NiFeCrBSi/WC Composite Coatings Fabricated by Vacuum Cladding |
(Eng)
|
|
Han C., Zhang X., Sun Y.
|
| 卷 120, 编号 9 (2019) |
Influence of the Direction of Propagation of the Main Crack on the Fracture Mechanism upon Impact Bending of Samples of High-Viscous Steel with a Filamentary Structure. Compression Region |
(Eng)
|
|
Morozova A., Schapov G., Khotinov V., Farber V., Selivanova O.
|
| 卷 120, 编号 9 (2019) |
Effect of Deep Cryogenic Treatment on Aging Processes of Al–Mg–Si Alloy |
(Eng)
|
|
Yuanchun Huang ., Li Y., Ren X., Xiao Z.
|
| 卷 120, 编号 9 (2019) |
Influence of the Direction of Propagation of the Main Crack on the Fracture Mechanism upon Impact Bending of Samples of High-Viscous Steel with a Filamentary Structure. Tensile Region |
(Eng)
|
|
Morozova A., Schapov G., Khotinov V., Farber V., Selivanova O.
|
| 卷 120, 编号 8 (2019) |
Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting |
(Eng)
|
|
Souissi S., Barhoumi H., M. ben Amar ., Elhalouani F.
|
| 卷 120, 编号 8 (2019) |
Stages of Plastic Flow of Silumin-Matrix-Based Composites during Compression |
(Eng)
|
|
Rusin N., Skorentsev A.
|
| 卷 120, 编号 8 (2019) |
Model of Development of Knock-On Atom Cascades in Solids |
(Eng)
|
|
Metelkin E., Manvelov A., Ponomarev A., Shmyrev V.
|
| 卷 120, 编号 8 (2019) |
Characterization of Microstructure and Mechanical Properties of Multilayer Al/Cu/Mg/Ni Composite Produced through Accumulative Roll Bonding |
(Eng)
|
|
Shakouri S., Eghbali B.
|
| 卷 120, 编号 7 (2019) |
Effect of Zr Addition on Microstructure and Properties of Al–Sn–Cu Based Alloy |
(Eng)
|
|
Xianwei Ren ., Huang Y., Liu Y.
|
| 卷 120, 编号 7 (2019) |
Structure and Properties of Antifriction Cu, Cu–C, and DLC Coatings |
(Eng)
|
|
Kiryukhantsev-Korneev F., Bondarev A.
|
| 1 - 25 的 179 信息 |
1 2 3 4 5 6 7 8 > >>
|
