检索

标题
作者
Effect of The Processes of Self-Tempering and Tempering on The Mechanical Characteristics and the Character of Fracture of Low-Carbon Martenstic Steel Quenched in Air
Vorobev R., Dubinskii V., Evstifeeva V.
A Study of Effect of Vanadium on Microstructure and Mechanical Properties of As-Cast and Austempered Ductile Iron
Bakhshinezhad H., Honarbakhshraouf A., Abdollah-Pour H.
Development of High-Strength, Fine, and Ultrafine-Grained Shape Memory Alloys
Pushin V., Kuranova N., Pushin A.
Structure of Al2Au Intermetallic Compound Obtained by Mechanochemical Synthesis
Volkova E., Volkov A., Antonov B.
Effect of Radial–Shear Rolling on the Formation of Structure and Mechanical Properties of Al–Ni and Al–Ca Aluminum–Matrix Composite Alloys of Eutectic Type
Akopyan T., Aleshchenko A., Belov N., Galkin S.
Investigation of the effect of aluminum on the phase composition of Ti–Al–Nb–Mo gamma alloys
Terlikbaeva A., Alimzhanova A., Shayakhmetova R., Smagulov D., Osipov P.
Structure of strengthening particles of niobium carbide in Fe–Cr–Ni cast refractory alloys
Kondrat’ev S., Svyatisheva E., Anastasiadi G., Petrov S.
Study of the Evolution of the Structure and Kinetics of Martensitic Transformations in a Titanium Nickelide upon Isothermal Annealing after Hot Helical Rolling
Kolobova A., Ryklina E., Prokoshkin S., Inaekyan K., Brailovskii V.
Constitutive relations for determining the critical conditions for dynamic recrystallization behavior
Choe J.
Evolution of the structure and mechanical properties of sheets of the Al–4.7Mg–0.32Mn–0.21Sc–0.09Zr alloy due to deformation accumulated upon rolling
Zolotorevskiy V., Dobrojinskaja R., Cheverikin V., Khamnagdaeva E., Pozdniakov A., Levchenko V., Besogonova E.
Simulation of the elastic deformation of laser-welded joints of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert
Pugacheva N., Myasnikova M., Michurov N.
Structural Changes of a Hot-Deformed Nickel Alloy in Mechanical Energy Dissipation Processing Maps
Barakhtin B., Vasil’eva E., Markova Y., Okhapkin K., Petrov S.
Effect of Thermomechanical Treatment on the Formation of Gradient Structure and Mechanical Properties in a Disk Made of Powder-Metallurgy Nickel-Based Superalloy
Ganeev A., Valitov V., Utyashev F., Imaev V.
Effect of Built Geometry on the Microstructure and Strength Characteristics of the Ti–6Al–4V Alloy Prepared by the Selective Laser Melting
Kazantseva N., Ezhov I., Vinogradova N., Il’inykh M., Fefelov A., Davydov D., Oleneva O., Karabanalov M.
Microstructure Evolution during Extrusion-Shear Process of as Cast AZ31 Magnesium Alloy
Hu H., Sun Z.
Mechanism of Surface Reinforcement of Steels by Nanocarbon Materials Using Laser Heating
Bocharov G., Eletskii A., Zilova O., Terentyev E., Fedorovich S., Chudina O., Churilov G.
Comprehensive analysis of fractures, microstructure, and physical and mechanical properties for the evaluation of the crack resistance of medium-carbon Cr–Ni–Mo steel
Vorob’ev R., Dubinskii V., Evstifeeva V.
Effect of heat treatment on the structure and hardness of high-entropy alloys CoCrFeNiMnVx (x = 0.25, 0.5, 0.75, 1)
Shaysultanov D., Stepanov N., Salishchev G., Tikhonovsky M.
Effect of the Size of Al3(Sc,Zr) Precipitates on the Structure of Multi-Directionally Isothermally Forged Al-Mg-Sc-Zr Alloy
Sitdikov O., Avtokratova E., Mukhametdinova O., Garipova R., Markushev M.
Structure, phase composition, and strengthening of cast Al–Ca–Mg–Sc alloys
Belov N., Naumova E., Bazlova T., Alekseeva E.
Investigation of the microstructure and properties of Al–Si–Mg/SiC composite materials produced by solidification under pressure
Mohamed E., Churyumov A.
An Experimental Investigation on the Properties of Two Novel Ternary Solder Alloys Sn–0.5Cu–3Bi and Sn–1Cu–1Ni Replacing Lead
Jayesh S., Jacob E.
Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting
Souissi S., Barhoumi H., M. ben Amar , Elhalouani F.
Constitutive Equation for the Hot Deformation Behavior of TiNiNb Shape Memory Alloy
Liu Junwei , Shiqiang L., Qi Y., Zhigang Z.
Evolution of the Microstructure and Mechanical Properties of Copper during the Pressing–Drawing Process
Volokitina I., Volokitin A.
1 - 25 的 87 信息 1 2 3 4 > >> 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语