| 期 |
标题 |
文件 |
| 卷 119, 编号 5 (2018) |
The Role of Welding Parameters on Achieving a Combination of High Strength and Ductility in Gas Tungsten Arc Welding of Cu–7Al–3Fe Aluminum Bronze |
(Eng)
|
|
Abbasi M., Derakhshandeh-Haghighi R.
|
| 卷 119, 编号 5 (2018) |
Microstructural Factors That Decrease the Local Strength of Grain Boundaries in Martensitic Steels |
(Eng)
|
|
Mishin V., Filippov G.
|
| 卷 119, 编号 4 (2018) |
Study of Deformation Phenomena in TRIP/TWIP Steels by Acoustic Emission and Scanning Electron Microscopy |
(Eng)
|
|
Linderov M., Segel C., Weidner A., Biermann H., Vinogradov A.
|
| 卷 119, 编号 4 (2018) |
Migration of Point Defects in the Field of a Temperature Gradient |
(Eng)
|
|
Kozlov A., Portnykh I., Pastukhov V.
|
| 卷 119, 编号 4 (2018) |
Effect of High Strain-Rate Deformation and Aging Temperature on the Evolution of Structure, Microhardness, and Wear Resistance of Low-Alloyed Cu–Cr–Zr Alloy |
(Eng)
|
|
Kheifets A., Khomskaya I., Korshunov L., Zel’dovich V., Frolova N.
|
| 卷 119, 编号 3 (2018) |
Study of the Properties of a High-Temperature 50Ti–40Pd–10Ni Shape Memory Alloy |
(Eng)
|
|
Popov N., Lar’kin V., Presnyakov D., Grishin E., Sysoeva T., Morozova T., Potemkin G., Kostyleva A.
|
| 卷 119, 编号 3 (2018) |
Influence of Heat Treatments on the Fracture Toughness of 2017A Aluminium Alloy |
(Eng)
|
|
Hemmouche L., Meghalet A., Henni Chebra A.
|
| 卷 119, 编号 2 (2018) |
Effect of High-Temperature Thermomechanical Treatment on the Brittle Fracture of Low-Carbon Steel |
(Eng)
|
|
Smirnov M., Pyshmintsev I., Varnak O., Mal’tseva A.
|
| 卷 119, 编号 2 (2018) |
Investigation on the Effect of Sub-Zero Treatment on Micro-Hardness and Microstructure of GTAW Welded Al–Si–Mg–Mn Alloy |
(Eng)
|
|
Devanathan R., Yuvarajan D., Christopher Selvam D., Venkatamuni T.
|
| 卷 119, 编号 2 (2018) |
Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel |
(Eng)
|
|
Shabashov V., Makarov A., Kozlov K., Sagaradze V., Zamatovskii A., Volkova E., Luchko S.
|
| 卷 119, 编号 2 (2018) |
Mechanism of Surface Reinforcement of Steels by Nanocarbon Materials Using Laser Heating |
(Eng)
|
|
Bocharov G., Eletskii A., Zilova O., Terentyev E., Fedorovich S., Chudina O., Churilov G.
|
| 卷 119, 编号 1 (2018) |
Structure, Dynamic Cracking Resistance, and Crack Growth Micromechanism in Pipe Billets after Thermomechanical Treatment |
(Eng)
|
|
Simonov M., Simonov Y., Shaimanov G.
|
| 卷 119, 编号 1 (2018) |
Comparing Microstructures and Tensile Properties of Intercritically Annealed and Quenched-Tempered 1.7Ni–1.5Cu–0.5Mo–0.2C Powder Metallurgy Steels |
(Eng)
|
|
Güral A., Başak H., Türkan M.
|
| 卷 119, 编号 1 (2018) |
Deformation Mechanisms in Highly Elastic Softened-State Cu–Be Alloy at Elevated Temperatures |
(Eng)
|
|
Zhao Z., Liu J., Lu S., Xiao Y., Yuan M.
|
| 卷 119, 编号 1 (2018) |
Acoustic Emission during Intermittent Creep in an Aluminum–Magnesium Alloy |
(Eng)
|
|
Shibkov A., Zheltov M., Gasanov M., Zolotov A.
|
| 卷 119, 编号 1 (2018) |
Modification of the Structure of Low-Carbon Pipe Steel by Helical Rolling, and the Increase in Its Strength and Cold Resistance |
(Eng)
|
|
Derevyagina L., Gordienko A., Pochivalov Y., Smirnova A.
|
| 卷 119, 编号 1 (2018) |
Structure and Thermal Stability of High-Strength Cu–18Nb Composite Depending on the Degree of Deformation |
(Eng)
|
|
Deryagina I., Popova E., Valova-Zaharevskaya E., Patrakov E.
|
| 卷 118, 编号 11 (2017) |
A comparative study of microstructure, oxidation resistance, mechanical, and tribological properties of coatings in Mo–B–(N), Cr–B–(N) and Ti–B–(N) systems |
(Eng)
|
|
Kiryukhantsev-Korneev F., Novikov A., Sagalova T., Petrzhik M., Levashov E., Shtansky D.
|
| 卷 118, 编号 11 (2017) |
Anticorrosion properties of textured substrates made of copper–nickel-based ternary alloys |
(Eng)
|
|
Khlebnikova Y., Suaridze T., Rodionov D., Egorova L., Gervas’eva I., Gulyaeva R.
|
| 卷 118, 编号 11 (2017) |
Structure, properties, and resistance to stress-corrosion cracking of a nitrogen-containing austenitic steel strengthened by thermomechanical treatment |
(Eng)
|
|
Mushnikova S., Kostin S., Sagaradze V., Kataeva N.
|
| 卷 118, 编号 11 (2017) |
Evolution of microstructure and mechanical properties of steel in the course of pressing–drawing |
(Eng)
|
|
Lezhnev S., Volokitina I., Volokitin A.
|
| 卷 118, 编号 10 (2017) |
Microstructural changes in cast martensitic steel after creep at 620°C |
(Eng)
|
|
Borisova Y., Dudko V., Skorobogatykh V., Shchenkova I., Kaibyshev R.
|
| 卷 118, 编号 10 (2017) |
Comprehensive analysis of fractures, microstructure, and physical and mechanical properties for the evaluation of the crack resistance of medium-carbon Cr–Ni–Mo steel |
(Eng)
|
|
Vorob’ev R., Dubinskii V., Evstifeeva V.
|
| 卷 118, 编号 9 (2017) |
Quantitative description of the flow-stress dependence of aluminum alloys at the stage of steady flow upon hot deformation on the Zener–Hollomon parameter |
(Eng)
|
|
Churyumov A., Teleshov V.
|
| 卷 118, 编号 9 (2017) |
High-strain-rate superplasticity of the Al–Zn–Mg–Cu alloys with Fe and Ni additions |
(Eng)
|
|
Kotov A., Mikhaylovskaya A., Borisov A., Yakovtseva O., Portnoy V.
|
| 76 - 100 的 179 信息 |
<< < 1 2 3 4 5 6 7 8 > >>
|
