Investigation of the Conditions of Formation of Aluminum-Magnesium Spinel Inclusions in Low-Carbon Automotive Sheet Steels of 08Yu type and Ultralow-Carbon Automotive Sheet Steels of the if and IF-HS Types


Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Тек жазылушылар үшін

Аннотация

We study the regularities of reduction of MgO from the lining and surface slag accompanied by the formation of adverse corrosion-active nonmetallic inclusions (CANI) based on aluminum-magnesium spinel in the course of treatment of the melts of 08Yu-type low-carbon steel and ultralow-carbon steels of the IF and IF-HS types with ten different compositions. It is shown that the amount of formed CANI regularly increases with the aluminum content of steel up to 0.05–0.06 wt.% and the MgO content of slag, especially over 12–14 wt.%. We proposed some efficient techniques aimed at guaranteeing the required purity of steel (from the viewpoint of these inclusions). For the first time, it is shown that the deposition of titanium sulfide and carbosulfide on the surfaces of aluminum-magnesium spinel inclusions increases their corrosive activity.

Авторлар туралы

A. Zaitsev

I. P. Bardin Central Scientific-Research Institute of Ferrous Metallurgy; M. V. Lomonosov Moscow State University

Хат алмасуға жауапты Автор.
Email: aizaitsev1@yandex.ru
Ресей, Moscow; Moscow

A. Koldaev

I. P. Bardin Central Scientific-Research Institute of Ferrous Metallurgy

Email: aizaitsev1@yandex.ru
Ресей, Moscow

A. Stepanov

I. P. Bardin Central Scientific-Research Institute of Ferrous Metallurgy

Email: aizaitsev1@yandex.ru
Ресей, Moscow

A. Amezhnov

I. P. Bardin Central Scientific-Research Institute of Ferrous Metallurgy

Email: aizaitsev1@yandex.ru
Ресей, Moscow

S. Dunaev

M. V. Lomonosov Moscow State University

Email: aizaitsev1@yandex.ru
Ресей, Moscow

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML

© Springer Science+Business Media, LLC, part of Springer Nature, 2019