Development and Implementation of a Device for the Separation of Metal and Slag During Tundish Filling
- Authors: Zhautikov F.B.1, Isagulov A.Z.1, Zhautikov B.A.2, Romanov V.I.2, Babenko A.A.3
-
Affiliations:
- Karaganda State Technical University
- Karaganda State Industrial University
- Institute of Metallurgy, Ural Division of the Russian Academy of Sciences
- Issue: Vol 63, No 7-8 (2019)
- Pages: 672-674
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/243015
- DOI: https://doi.org/10.1007/s11015-019-00874-z
- ID: 243015
Cite item
Abstract
Nonmetallic inclusions in steel such as oxides, silicates, aluminates, spinels, etc. substantially reduce the quality of metal. They are mainly introduced by the slag formed on the metal surface of a doublestrand plant. It is proposed to separate the slag from the metal using a special perforated tube installed on the refractory pocket block of the ladle bottom and fixed with gunning mix. The use of this device for continuous slab casting ensures the high quality of hot- and cold-rolled sheets.
Keywords
About the authors
F. B. Zhautikov
Karaganda State Technical University
Author for correspondence.
Email: farhat_zhautikov@mail.ru
Kazakhstan, Karaganda
A. Z. Isagulov
Karaganda State Technical University
Email: farhat_zhautikov@mail.ru
Kazakhstan, Karaganda
B. A. Zhautikov
Karaganda State Industrial University
Email: farhat_zhautikov@mail.ru
Kazakhstan, Temirtau
V. I. Romanov
Karaganda State Industrial University
Email: farhat_zhautikov@mail.ru
Kazakhstan, Temirtau
A. A. Babenko
Institute of Metallurgy, Ural Division of the Russian Academy of Sciences
Email: farhat_zhautikov@mail.ru
Russian Federation, Yekaterinburg
Supplementary files
