Email this article Prediction of Saturation and Strength Properties of a Nitrided Layer of Nickel Alloy 40KhNYu-VI Based on Calculation Methods
- Authors: Jian D.K.1, Semenov M.Y.1
-
Affiliations:
- Bauman Moscow State Technical University (BMSTU)
- Issue: Vol 61, No 9-10 (2018)
- Pages: 830-835
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/240862
- DOI: https://doi.org/10.1007/s11015-018-0571-8
- ID: 240862
Cite item
Open Access
Access granted
Subscription Access
Abstract
A mathematical model is developed for internal anisotropy of a chromium-nickel alloy alloyed with aluminum, adequate to the available experimental data. An increase in alloy yield strength is predicted by a factor of 1.5 after nitriding. A mathematical model is recommended for developing a production regime for nitriding non-magnetic bearing rings.
About the authors
Ding Kai Jian
Bauman Moscow State Technical University (BMSTU)
Author for correspondence.
Email: kjding222@163.com
Russian Federation, Moscow
M. Yu. Semenov
Bauman Moscow State Technical University (BMSTU)
Email: kjding222@163.com
Russian Federation, Moscow
Supplementary files
