Computer Simulation of Piercing in a Four-High Screw Rolling Mill

B. A. Romantsev; M. M. Skripalenko; Tran Ba Huy; M. N. Skripalenko; Yu. A. Gladkov; A. A. Gartvig

doi:10.1007/s11015-018-0556-7

Computer Simulation of Piercing in a Four-High Screw Rolling Mill

Authors: Romantsev B.A.¹, Skripalenko M.M.¹, Huy T.B.¹, Skripalenko M.N.¹, Gladkov Y.A.², Gartvig A.A.³
Affiliations:
1. National University of Science and Technology MISiS
2. Bauman Moscow State Technical University
3. QuantorForm Company
Issue: Vol 61, No 9-10 (2018)
Pages: 729-735
Section: Article
URL: https://journals.rcsi.science/0026-0894/article/view/240785
DOI: https://doi.org/10.1007/s11015-018-0556-7
ID: 240785

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

A piercing process for a new four-high screw rolling mill without guides designed by comparing existing piercing processes in screw rolling mills is proposed. To evaluate the feasibility of this process, piercing in two-, three-, and four-high screw-rolling mills was simulated using QForm FEM software. Simulation results demonstrate advantages of the new piercing process according to several criteria, including energy consumption.