Email this article Development of a Technology for a 16 MN Forging Press at the Electrostal Metallurgical Plant
- Authors: Kabanov I.V.1, Glushenkova S.G.1, Polozhentsev K.A.1, Dmitriev A.I.1, Pasechnyi A.I.1
-
Affiliations:
- Electrostal Metallurgical Plant
- Issue: Vol 61, No 7-8 (2017)
- Pages: 694-699
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/240717
- DOI: https://doi.org/10.1007/s11015-017-0551-4
- ID: 240717
Cite item
Open Access
Access granted
Subscription Access
Abstract
The SMS Meer 16 MN forging press commissioned at the Electrostal Metallurgical Plant and the associated forging process developed by experts of the plant are described. The installation of this forging press is one of the retrofit stages at the plant. The forging schedule for KhN62VMYuT-VD (EP708-VD) creep-resistant alloy is designed using ForgeBase software. Mastering the hot-forming process on the forging press made it possible to optimize the production schedules and to reduce substantially the production expenditures.
About the authors
I. V. Kabanov
Electrostal Metallurgical Plant
Author for correspondence.
Email: i.kabanov@elsteel.ru
Russian Federation, Electrostal, Moscow Region
S. G. Glushenkova
Electrostal Metallurgical Plant
Email: i.kabanov@elsteel.ru
Russian Federation, Electrostal, Moscow Region
K. A. Polozhentsev
Electrostal Metallurgical Plant
Email: i.kabanov@elsteel.ru
Russian Federation, Electrostal, Moscow Region
A. I. Dmitriev
Electrostal Metallurgical Plant
Email: i.kabanov@elsteel.ru
Russian Federation, Electrostal, Moscow Region
A. I. Pasechnyi
Electrostal Metallurgical Plant
Email: i.kabanov@elsteel.ru
Russian Federation, Electrostal, Moscow Region
Supplementary files
