Enviar artigo por via de e-mail Studying the Nonstationary Stages of Screw Rolling of Billets with Profiled Ends
- Autores: Karpov B.V.1, Skripalenko M.M.1, Galkin S.P.1, Skripalenko M.N.1, Samusev S.V.1, Huy T.B.1, Pavlov S.A.1
-
Afiliações:
- National University of Science and Technology MISiS
- Edição: Volume 61, Nº 3-4 (2017)
- Páginas: 257-264
- Seção: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/240132
- DOI: https://doi.org/10.1007/s11015-017-0486-9
- ID: 240132
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The rolling of VT-6 alloy billets with profiled ends in a screw rolling mill is studied to determine the geometry of the end sections minimizing the funnel depth after rolling. The rolling experiment conducted is of 23 factorial design. The nonstationary stages of the process are simulated using Deform-3D software. The results of the simulation are used to find the shape and dimensions of the end sections of the billet that minimize the funnel depth.
Sobre autores
B. Karpov
National University of Science and Technology MISiS
Autor responsável pela correspondência
Email: poinson@inbox.ru
Rússia, Moscow
M. Skripalenko
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
S. Galkin
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
M. Skripalenko
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
S. Samusev
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
Tran Huy
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
S. Pavlov
National University of Science and Technology MISiS
Email: poinson@inbox.ru
Rússia, Moscow
Arquivos suplementares
