Email this article Modeling of the Temperature Field of Blast Furnace Tuyeres Using Deform-2D Software
- Authors: Radyuk A.G.1, Titlyanov A.E.1, Skripalenko M.M.1
-
Affiliations:
- National University of Science and Technology MISiS
- Issue: Vol 60, No 9-10 (2017)
- Pages: 1011-1015
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239407
- DOI: https://doi.org/10.1007/s11015-017-0400-5
- ID: 239407
Cite item
Open Access
Access granted
Subscription Access
Abstract
The effect of the insulation liner in the tuyere with and without air gap and the thermal-spray coating on the temperature field of the blast furnace tuyere is studied. Deform-2D software is used to analyze the dynamics of heating of the tuyere (axisymmetric problem). It is shown that the insulation liner and the air gap between it and the tuyere affect strongly the temperature field of the tuyere. The burnout of the tuyere contacting with hot iron is simulated as an example.
About the authors
A. G. Radyuk
National University of Science and Technology MISiS
Author for correspondence.
Email: radjuk@rambler.ru
Russian Federation, Moscow
A. E. Titlyanov
National University of Science and Technology MISiS
Email: mms@misis.ru
Russian Federation, Moscow
M. M. Skripalenko
National University of Science and Technology MISiS
Author for correspondence.
Email: mms@misis.ru
Russian Federation, Moscow
Supplementary files
