Email this article Experimental Determination of Temperature Parameters for Evaluating the Possibility of Manufacturing Alloy Ti–3Al–2.5V Hot-Extruded Tubes
- Authors: Illarionov A.G.1, Kosmatskii Y.I.2,3, Filyaeva E.A.4, Vodolazskii F.V.1, Barannikova N.A.1
-
Affiliations:
- Ural Federal University
- Russian Research Institute of the Pipe Industry (RosNITI)
- South-Ural State University
- Scientific and Technical Center, Pipe Metallurgical Company (TMK NTTs)
- Issue: Vol 60, No 9-10 (2017)
- Pages: 983-988
- Section: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/239381
- DOI: https://doi.org/10.1007/s11015-017-0396-x
- ID: 239381
Cite item
Open Access
Access granted
Subscription Access
Abstract
Microstructural methods, thermal analysis, and thermomechanical test methods are used to study the structure and properties of hot-pressed semifinished product of alloy Ti–3Al–2.5V used for developing manufacturing technology for hot-extruded tubes. It is shown that the use of calculation methods for evaluating polymorphic transformation temperature makes it possible to assess the required temperature range with use of a test quenching method. Thermal analysis and laboratory thermomechanical tests are used to determine the temperature range for extrusion in two regions taking account of deformation heating.
About the authors
A. G. Illarionov
Ural Federal University
Author for correspondence.
Email: a.g.illarionov@urfu.ru
Russian Federation, Ekaterinburg
Ya. I. Kosmatskii
Russian Research Institute of the Pipe Industry (RosNITI); South-Ural State University
Email: a.g.illarionov@urfu.ru
Russian Federation, Chelyabinsk; Chelyabinsk
E. A. Filyaeva
Scientific and Technical Center, Pipe Metallurgical Company (TMK NTTs)
Email: a.g.illarionov@urfu.ru
Russian Federation, Chelyabinsk
F. V. Vodolazskii
Ural Federal University
Email: a.g.illarionov@urfu.ru
Russian Federation, Ekaterinburg
N. A. Barannikova
Ural Federal University
Email: a.g.illarionov@urfu.ru
Russian Federation, Ekaterinburg
Supplementary files
