Use of Glow Discharge Nitriding for Raising the Surface Hardness of Bearing Parts from Precision Nickel Alloys

M. Yu. Semenov; Jian Ding Kai; A. E. Smirnov; S. Yu. Shevchenko; V. A. Aleksandrov

doi:10.1007/s11041-019-00396-0

Use of Glow Discharge Nitriding for Raising the Surface Hardness of Bearing Parts from Precision Nickel Alloys

作者: Semenov M.Y.¹, Kai J.D.¹, Smirnov A.E.¹, Shevchenko S.Y.¹, Aleksandrov V.A.²
隶属关系:
1. N. É. Bauman Moscow State Technical University
2. Moscow Automobile and Road Construction State Technical University (MADI)
期: 卷 61, 编号 3-4 (2019)
页面: 173-177
栏目: Surface Engineering
URL: https://journals.rcsi.science/0026-0673/article/view/236581
DOI: https://doi.org/10.1007/s11041-019-00396-0
ID: 236581

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

Precision nickel alloy 40KhNYu-VI used for fabricating nonmagnetic precision bearings is studied after nitriding in glow discharge in an experimental facility at a high temperature (730 and 900°C) and in commercial equipment at 540°C. The effect of the temperature and duration of nitriding and of the mode of heat treatment on the structure and hardness of the surface layer obtained is determined.