Study of the Structure and Hardness of Alloys of the Sn – Cu – Co System Used as Diamond Abrasive Tool Binders
- Autores: Sokolov E.G.1, Artem’ev V.P.1, Voronova M.I.2
-
Afiliações:
- Kuban State Technological University
- National Research Technological University “MISiS”
- Edição: Volume 59, Nº 5-6 (2017)
- Páginas: 321-324
- Seção: Technical Information
- URL: https://journals.rcsi.science/0026-0673/article/view/235735
- DOI: https://doi.org/10.1007/s11041-017-0150-9
- ID: 235735
Citar
Resumo
The effect of the chemical composition of alloys of the Sn – Cu – Co system used as a binder for diamond abrasive tools on their structure and hardness is studied. It is shown that in the range of concentrations of the elements studied alloy structure is represented by three phases, i.e., β-Co, a solid solution of tin and cobalt in copper (Cu), and an ε (Cu3Sn) intermetallic phase. The lowest microhardness of the three phases is exhibited by β-Co, as a result of which with an increase in cobalt content alloy macrohardness decreases.
Sobre autores
E. Sokolov
Kuban State Technological University
Autor responsável pela correspondência
Email: e_sokolov.07@mail.ru
Rússia, Krasnodar
V. Artem’ev
Kuban State Technological University
Email: e_sokolov.07@mail.ru
Rússia, Krasnodar
M. Voronova
National Research Technological University “MISiS”
Email: e_sokolov.07@mail.ru
Rússia, Moscow
Arquivos suplementares
