电邮这篇文章 Effect of Silicon Content on Carbide Precipitation and Low-Temperature Toughness of Pressure Vessel Steels
- 作者: Ruan L.H.1, Wu K.M.1, Qiu J.A.1, Shirzadi A.A.1,2,3, Rodionova I.G.4
-
隶属关系:
- The State Key Laboratory of Refectories and Metallurgy, Hubei Collaborative Innovation Center for Advanced Steels, International Research Institute for Steel Technology, Wuhan University of Science and Technology
- Department of Engineering and Innovation, The Open University, Walton Hall
- Department of Materials Science and Metallurgy, University of Cambridge
- I. P. Bardin Central Research Institute for Ferrous Metallurgy
- 期: 卷 59, 编号 1-2 (2017)
- 页面: 97-101
- 栏目: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235562
- DOI: https://doi.org/10.1007/s11041-017-0110-4
- ID: 235562
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Cr – Mn – Mo – Ni pressure vessel steels containing 0.54 and 1.55% Si are studied. Metallographic and fractographic analyses of the steels after tempering at 650 and 700°C are performed. The impact toughness at – 30°C and the hardness of the steels are determined. The mass fraction of the carbide phase in the steels is computed with the help of the J-MatPro 4.0 software.
作者简介
L. Ruan
The State Key Laboratory of Refectories and Metallurgy, Hubei Collaborative Innovation Center for Advanced Steels, International Research Institute for Steel Technology, Wuhan University of Science and Technology
Email: petroprom2013@yandex.ru
中国, Wuhan
K. Wu
The State Key Laboratory of Refectories and Metallurgy, Hubei Collaborative Innovation Center for Advanced Steels, International Research Institute for Steel Technology, Wuhan University of Science and Technology
Email: petroprom2013@yandex.ru
中国, Wuhan
J. Qiu
The State Key Laboratory of Refectories and Metallurgy, Hubei Collaborative Innovation Center for Advanced Steels, International Research Institute for Steel Technology, Wuhan University of Science and Technology
Email: petroprom2013@yandex.ru
中国, Wuhan
A. Shirzadi
The State Key Laboratory of Refectories and Metallurgy, Hubei Collaborative Innovation Center for Advanced Steels, International Research Institute for Steel Technology, Wuhan University of Science and Technology; Department of Engineering and Innovation, The Open University, Walton Hall; Department of Materials Science and Metallurgy, University of Cambridge
Email: petroprom2013@yandex.ru
中国, Wuhan; Milton Keynes; Cambridge
I. Rodionova
I. P. Bardin Central Research Institute for Ferrous Metallurgy
Email: petroprom2013@yandex.ru
俄罗斯联邦, Moscow
补充文件
