Microstructure and Mechanical Properties of Welds of Al – Mg – Si Alloys After Different Modes of Impulse Friction Stir Welding

S. Yu. Kondrat’ev; Yu. N. Morozova; Yu. A. Golubev; C. Hantelmann; A. A. Naumov; V. G. Mikhailov

doi:10.1007/s11041-018-0213-6

Microstructure and Mechanical Properties of Welds of Al – Mg – Si Alloys After Different Modes of Impulse Friction Stir Welding

作者: Kondrat’ev S.Y.¹, Morozova Y.N.¹^,2, Golubev Y.A.¹^,2, Hantelmann C.², Naumov A.A.¹, Mikhailov V.G.¹^,2
隶属关系:
1. St. Petersburg Polytechnic University
2. Brandenburg University of Technology
期: 卷 59, 编号 11-12 (2018)
页面: 697-702
栏目: Article
URL: https://journals.rcsi.science/0026-0673/article/view/236231
DOI: https://doi.org/10.1007/s11041-018-0213-6
ID: 236231

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

Welded joints of aluminum alloy 6082-T6 formed by the method of impulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.