Tribotechnical and Energy Assessment of Parts of Working Members of Cultivating Machines After Carburizing and Laser Hardening
- Autores: Pyndak V.I.1, Novikov A.E.2,3
-
Afiliações:
- Volgograd State Agrarian University
- Volgograd State Technical University
- All-Russia Research Institute for Irrigated Agriculture
- Edição: Volume 58, Nº 3-4 (2016)
- Páginas: 226-230
- Seção: Surface Engineering
- URL: https://journals.rcsi.science/0026-0673/article/view/235497
- DOI: https://doi.org/10.1007/s11041-016-9994-7
- ID: 235497
Citar
Resumo
Results of experimental studies of low-carbon steel 20 and high-carbon steels of types 70 and 65G after carburizing, heat treatment and laser hardening are presented. The variation of the microhardness of the surface layers of the steels and of their wear resistance due to different variants of hardening is determined. Optimum modes of treatment aimed at raising the strength and wear resistance are suggested for the steels used for working members of cultivating machines.
Sobre autores
V. Pyndak
Volgograd State Agrarian University
Autor responsável pela correspondência
Email: sport2@vlpost.ru
Rússia, Volgograd
A. Novikov
Volgograd State Technical University; All-Russia Research Institute for Irrigated Agriculture
Email: sport2@vlpost.ru
Rússia, Volgograd; Volgograd
Arquivos suplementares
