Enviar artigo por via de e-mail Variation of the Composition and Properties of Cementite in Heat Treatment of Tilling Machine Members from Chilled Cast Iron
- Autores: Kostyleva L.V.1, Gapich D.S.1, Novikov A.E.2,3,4, Motorin V.A.1,3
-
Afiliações:
- Volgograd State Rural University
- Volgograd State Technical University
- Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”
- RUDN University
- Edição: Volume 61, Nº 3-4 (2019)
- Páginas: 205-210
- Seção: Cast Iron
- URL: https://journals.rcsi.science/0026-0673/article/view/236592
- DOI: https://doi.org/10.1007/s11041-019-00401-6
- ID: 236592
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Results of a study of white iron cementite in binary Fe – C and ternary Fe – C – Si compositions and in castings of unalloyed white iron with traditional composition are presented. It is shown that the hardness and the corrosion strength of the cementite may vary in a wide range depending on the rate of cooling of the iron after crystallization. Optimum processes for casting and heat treatment of members of tilling machines from chilled cast iron are developed for raising their strength and wear resistance.
Sobre autores
L. Kostyleva
Volgograd State Rural University
Autor responsável pela correspondência
Email: kostyleva.v.l@yandex.ru
Rússia, Volgograd
D. Gapich
Volgograd State Rural University
Email: kostyleva.v.l@yandex.ru
Rússia, Volgograd
A. Novikov
Volgograd State Technical University; Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”; RUDN University
Email: kostyleva.v.l@yandex.ru
Rússia, Volgograd; Volgograd; Moscow
V. Motorin
Volgograd State Rural University; Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”
Email: kostyleva.v.l@yandex.ru
Rússia, Volgograd; Volgograd
Arquivos suplementares
