| Edição |
Título |
Arquivo |
| Volume 58, Nº 9-10 (2017) |
Effect of Low Additions of Y, Sm, Gd, Hf and Er on the Structure and Hardness of Alloy Al – 0.2% Zr – 0.1% Sc |
|
|
Pozdnyakov A., Osipenkova A., Popov D., Makhov S., Napalkov V.
|
| Volume 59, Nº 7-8 (2017) |
Effect of Low-Cycle Thermocycling Treatment on Corrosion and Mechanical Properties of Corrosion-Resistant Steel 12Kh18N10T Irradiated with Neutrons |
|
|
Yarovchuk A., Maksimkin O., Tsay K.
|
| Volume 58, Nº 5-6 (2016) |
Effect of Magnesium Additions on Composites with Al and Al – 12% Si Matrices Strengthened with B4C and Prepared by Infiltration Under Pressure |
|
|
Çevik E., Sun Y., Ahlatci H., Turen Y.
|
| Volume 60, Nº 11-12 (2019) |
Effect of Medium-Temperature Additional Tempering on the Carbide Phase and Cold Resistance of Heat-Hardenable Steel 09G2SA-A |
|
|
Gorynin V., Kondrat’ev S., Olenin M., Mikhailov M.
|
| Volume 59, Nº 7-8 (2017) |
Effect of Microalloying of Roll Steel 70Kh3G2VTB on the Kinetics of Phase Transformations and Fine Structure Under Crystallization and Heat Hardening |
|
|
Krylova S., Fot A., Gryzunov V., Firsova N.
|
| Volume 57, Nº 11-12 (2016) |
Effect of Microalloying, with Rem Inclusively, on the Structure, Phase Composition and Properties of (α + β)-Titanium Alloy |
|
|
Illarionov A., Popov A., Illarionova S.
|
| Volume 61, Nº 1-2 (2019) |
Effect of Microstructure and Heat Treatment on Resistance of Steels to Carbon Dioxide Corrosion |
|
|
Zyryanov A., Vyboishchik M., Ioffe A.
|
| Volume 58, Nº 3-4 (2016) |
Effect of Microstructure and Segregation of Elements on the Impact Toughness of High-Strength Low-Carbon Bainitic Steel |
|
|
Minxian D., Huaxia P., Hongbin T., Li S., Ling O.
|
| Volume 60, Nº 1-2 (2018) |
Effect of Modes of Diffusion Welding and Thermohydrogen Treatment on the Structure and Properties of Porous Coatings from Titanium Fibers on a Monolithic Substrate from Alloy VT6 |
|
|
Kollerov M., Ilyin A., Runova Y., Popov N.
|
| Volume 61, Nº 3-4 (2019) |
Effect of Modes of Heterogenizing Annealing Before Cold Rolling on the Structure and Properties of Sheets from Alloy 1565ch |
|
|
Kishchik M., Mikhailovskaya A., Kotov A., Drits A., Portnoy V.
|
| Volume 58, Nº 3-4 (2016) |
Effect of Modes of Homogenization of Ingots on the Microstructure, Phase Composition and Mechanical Properties of Alloy 01570 at Elevated Temperatures |
|
|
Reznik P., Chikova O., Ovsyannikov B.
|
| Volume 61, Nº 3-4 (2019) |
Effect of Molybdenum on the Microstructure and Oxidation Behavior of Hot-Pressed TaCr2 Alloys |
|
|
Yao J., Lu S., Xiao X., Deng L.
|
| Volume 61, Nº 3-4 (2019) |
Effect of Nanosize Tungsten Powder on the Microstructure and Mechanical Properties of Silumins |
|
|
Zykova A., Chumaevskii A., Martyushev N.
|
| Volume 59, Nº 7-8 (2017) |
Effect of Neodymium and Zirconium on the Structure of Castable Magnesium Alloy ML10 (NZ30K) |
|
|
Koltygin A., Bazhenov V., Nikitina A.
|
| Volume 59, Nº 11-12 (2018) |
Effect of Nitriding on the Wear Resistance of Tool Powder Steels with Different Contents of V, Cr and Mo |
|
|
Şelte A., Özkal B., Arslan K., Ülker S., Hatman A.
|
| Volume 60, Nº 1-2 (2018) |
Effect of Nitrogen Alloying on Short-Term and Long-Term Mechanical Properties of Steel 07Kh12NMFB |
|
|
Artem’eva D., Anastasiadi G.
|
| Volume 59, Nº 3-4 (2017) |
Effect of Parameters of Deformation and Thermal Deformation Aging on the Impact Toughness of Structural Steel After TMT and HT |
|
|
Goli-Oglu E.
|
| Volume 58, Nº 7-8 (2016) |
Effect of Parameters of Thermal-Rate Treatment of Melt on Iron-Containing Phases in Alloy Al – 15% Si – 2.7% Fe |
|
|
Wang Q., Geng H., Wang F., Lin X., Wang C.
|
| Volume 58, Nº 9-10 (2017) |
Effect of Partial Substitution of Neodymium with Praseodymium on the Magnetic and Process Properties of Sintered Magnets of Type NdFeB |
|
|
Dormidontov N., Dormidontov A., Lileev A., Kamynin A., Lukin A.
|
| Volume 58, Nº 7-8 (2016) |
Effect of Plasma Nitriding Parameters on the Wear Resistance of Alloy Inconel 718 |
|
|
Kovací H., Ghahramanzadeh ASL H., Albayrak Ç., Alsaran A., Çelik A.
|
| Volume 58, Nº 3-4 (2016) |
Effect of Plastic Deformation on the Structure and Properties of Alloy IMV7-1 of the Mg – Y – Gd – Zr System |
|
|
Rokhlin L., Dobatkina T., Luk’yanova E., Korol’kova I., Choporov V.
|
| Volume 61, Nº 5-6 (2019) |
Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy |
|
|
Rajendran C., Srinivasan K., Balasubramanian V., Balaji H., Selvaraj P.
|
| Volume 58, Nº 11-12 (2017) |
Effect of Precipitation on Cryogenic Toughness in Isothermally Aged Austenitic Stainless Steel |
|
|
Saucedo-Muñoz M., Lopez-Hirata V., Avila-Davila E., Villegas-Cardenas J., Gonzalez-Velazquez J.
|
| Volume 61, Nº 7-8 (2019) |
Effect of Preliminary Cold Working on High-Temperature Tensile Behavior of Nickel-Free High-Nitrogen Austenitic Steel |
|
|
Lal J., Kumar S., Srinivas N.
|
| Volume 59, Nº 5-6 (2017) |
Effect of Preliminary Quenching on the Efficiency of Hardening Heat Treatment of Cold-Deformed β-Titanium Alloy TS6 |
|
|
Shaboldo O., Mazurov S., Skotnikova M., Shamshurin A., Kononov A.
|
| 176 - 200 de 539 resultados |
<< < 3 4 5 6 7 8 9 10 11 12 > >> |
