Email this article Texture Formation in Hot Rolling of Electrical Anisotropic Steel
- Authors: Rudskoy A.I.1, Kononov A.A.2, Kondrat’ev S.Y.1,3, Matveev M.A.1
-
Affiliations:
- Peter the Great St. Petersburg Polytechnic University
- D. V. Efremov Research Institute of Electrophysical Equipment
- National Technology Initiative “New Production Technologies” Center at Peter the Great St. Petersburg Polytechnic University
- Issue: Vol 60, No 11-12 (2019)
- Pages: 689-694
- Section: Metal Science Research at the National Technology Initiative “New Production Technologies” Center of Peter the Great St. Petersburg Polytechnic University
- URL: https://journals.rcsi.science/0026-0673/article/view/236481
- DOI: https://doi.org/10.1007/s11041-019-00341-1
- ID: 236481
Cite item
Open Access
Access granted
Subscription Access
Abstract
Processes of structure and texture formation in hot rolling of electrical anisotropic steel are studied. It is shown that the structure of the surface layers of hot-rolled strips forms as a result of the joint action of γ → α phase transformation and dynamic recrystallization. The structure of the central layers forms as a result of recovery of deformed grains.
About the authors
A. I. Rudskoy
Peter the Great St. Petersburg Polytechnic University
Email: kononov.alexandr@yahoo.com
Russian Federation, St. Petersburg
A. A. Kononov
D. V. Efremov Research Institute of Electrophysical Equipment
Author for correspondence.
Email: kononov.alexandr@yahoo.com
Russian Federation, St. Petersburg
S. Yu. Kondrat’ev
Peter the Great St. Petersburg Polytechnic University; National Technology Initiative “New Production Technologies” Center at Peter the Great St. Petersburg Polytechnic University
Email: kononov.alexandr@yahoo.com
Russian Federation, St. Petersburg; St. Petersburg
M. A. Matveev
Peter the Great St. Petersburg Polytechnic University
Email: kononov.alexandr@yahoo.com
Russian Federation, St. Petersburg
Supplementary files
