Influence of the Chemical Composition of Al/AlC/a-C:H Coatings on the Mechanical Properties of Magnesium Alloy AZ31
- Authors: Kaczmarek Ł.1, Klich M.1, Tuta W.1, Kyzioł K.2, Kuoetrowski P.3, Batory D.1, Szymañski W.1, Stegliñski M.1, Kottfer D.4
-
Affiliations:
- Institute of Materials Science and Engineering, Lodz University of Technology
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology
- Faculty of Chemistry, Jagiellonian University
- Faculty of Mechanical Engineering, Technical University of Košice
- Issue: Vol 60, No 7-8 (2018)
- Pages: 443-449
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/236395
- DOI: https://doi.org/10.1007/s11041-018-0298-y
- ID: 236395
Cite item
Abstract
The composition of wear-resistant Al/AlC/a-C:H coatings deposited on a magnesium alloy by combination of radio frequency plasma assisted chemical vapor deposition and magnetron sputtering is studied. It is shown that the mechanical properties of the coatings vary depending on the composition of the amorphous C:H layers after changing the negative bias polarization of the process from 150 to 600 V; the carbon structure may be varied from a disordered one to a graphite one as well as the sp2/sp3 bonds ratio.
About the authors
Ł. Kaczmarek
Institute of Materials Science and Engineering, Lodz University of Technology
Author for correspondence.
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
M. Klich
Institute of Materials Science and Engineering, Lodz University of Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
W. Tuta
Institute of Materials Science and Engineering, Lodz University of Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
K. Kyzioł
Faculty of Materials Science and Ceramics, AGH University of Science and Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Kraków
P. Kuoetrowski
Faculty of Chemistry, Jagiellonian University
Email: lukaszkaczmarek78@gmail.com
Poland, Kraków
D. Batory
Institute of Materials Science and Engineering, Lodz University of Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
W. Szymañski
Institute of Materials Science and Engineering, Lodz University of Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
M. Stegliñski
Institute of Materials Science and Engineering, Lodz University of Technology
Email: lukaszkaczmarek78@gmail.com
Poland, Lodz
D. Kottfer
Faculty of Mechanical Engineering, Technical University of Košice
Email: lukaszkaczmarek78@gmail.com
Slovakia, Košice
Supplementary files
