Structure-Phase Condition and Tribological Properties of Coatings Based on Self-Fluxing Nickel Alloy PG-12N-01 After Laser Surfacing

O. G. Devoino; E. É. Feldshtein; M. A. Kardapolova; N. I. Lutsko

doi:10.1007/s11041-017-0090-4

Structure-Phase Condition and Tribological Properties of Coatings Based on Self-Fluxing Nickel Alloy PG-12N-01 After Laser Surfacing

Authors: Devoino O.G.¹, Feldshtein E.É.², Kardapolova M.A.¹, Lutsko N.I.¹
Affiliations:
1. Belarus National Technical University
2. Zielona Gora University
Issue: Vol 58, No 11-12 (2017)
Pages: 748-752
Section: Article
URL: https://journals.rcsi.science/0026-0673/article/view/236111
DOI: https://doi.org/10.1007/s11041-017-0090-4
ID: 236111

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Some parameters of laser surfacing of self-fluxing nickel alloy PG-12N-01 are considered. Different structures containing a low-melting γ-Ni – Ni₃B eutectic and a γ-Ni – Cr₃C₂ eutectic that crystallizes at a higher temperature and forms the strength skeleton of the coating may form depending on the rate of the surfacing. The effect of the rate of the surfacing on the wear resistance of the coating and on the coefficients of dry friction are determined.