Email this article Fabrication of Intermetallic Titanium Alloy Based on Ti2AlNb by Rapid Quenching of Melt
- Authors: Senkevich K.S.1, Serov M.M.1, Umarova O.Z.1
-
Affiliations:
- Russian State Technological University after K. E. Tsiolkovsky
- Issue: Vol 59, No 7-8 (2017)
- Pages: 463-466
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235833
- DOI: https://doi.org/10.1007/s11041-017-0172-3
- ID: 235833
Cite item
Open Access
Access granted
Subscription Access
Abstract
The possibility of fabrication of rapidly quenched fibers from alloy Ti – 22Al – 27Nb by extracting a hanging melt drop is studied. The special features of the production of electrodes for spraying the fibers by sintering mechanically alloyed powdered components of the alloy, i.e., titanium hydride, niobium, and aluminum dust, are studied. The rapidly quenched fibers with homogeneous phase composition and fine-grained structure produced from alloy Ti – 22Al – 27Nb are suitable for manufacturing compact semiproducts by hot pressing.
About the authors
K. S. Senkevich
Russian State Technological University after K. E. Tsiolkovsky
Author for correspondence.
Email: senkevichks@yandex.ru
Russian Federation, Moscow
M. M. Serov
Russian State Technological University after K. E. Tsiolkovsky
Email: senkevichks@yandex.ru
Russian Federation, Moscow
O. Z. Umarova
Russian State Technological University after K. E. Tsiolkovsky
Email: senkevichks@yandex.ru
Russian Federation, Moscow
Supplementary files
