Email this article Prediction of the Properties of Heat-Affected Zone of Welded Joints of Sheets from Aluminum Alloys with Structured Surface
- Authors: Mikhailov V.G.1,2
-
Affiliations:
- Brandenburg University of Technology
- Peter the Great St. Petersburg Polytechnic University
- Issue: Vol 58, No 1-2 (2016)
- Pages: 46-50
- Section: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235347
- DOI: https://doi.org/10.1007/s11041-016-9963-1
- ID: 235347
Cite item
Open Access
Access granted
Subscription Access
Abstract
Welded joints of light structured sheets from aluminum alloy EN AW-6181-T4 (DIN EN 515) of the Al – Si – Mg system are studied. The welding is performed in an argon environment with a short arc by the method of cold metal transfer (CMT®). The results of the study are used in an amended Leblond model for describing the variation of the properties of the heat-affected zone of welded joints of structured sheets.
About the authors
V. G. Mikhailov
Brandenburg University of Technology; Peter the Great St. Petersburg Polytechnic University
Email: petroprom2013@yandex.ru
Germany, Cottbus; St. Petersburg
Supplementary files
