Email this article Special Features of the Carbonitriding of Parts of Instrument Bearings Designed for Extreme Service Conditions
- Authors: Smirnov A.E.1, Shevchenko S.Y.1, Shchipunov V.S.2, Kunyaev V.E.2, Seval’nev G.S.1,3
-
Affiliations:
- Moscow State Technical University im. N. E. Baumana
- ”OK-LOZA” JSC
- I. P. Bardin Central Scientific Research Institute of Ferrous Metallurgy
- Issue: Vol 58, No 5-6 (2016)
- Pages: 287-292
- Section: Thermochemical Treatment
- URL: https://journals.rcsi.science/0026-0673/article/view/235113
- DOI: https://doi.org/10.1007/s11041-016-0005-9
- ID: 235113
Cite item
Open Access
Access granted
Subscription Access
Abstract
A study is made of complexly alloyed steel 8Kh4V9F2-Sh, which is used for fabricating parts of engineering bearings operating under extreme conditions. Vacuum processes are shown to be preferable to gas carburizing for hardening the races of precision bearings. Vacuum carburizing is shown to be an effective technique for forming quality diffusion layers.
About the authors
A. E. Smirnov
Moscow State Technical University im. N. E. Baumana
Author for correspondence.
Email: smirnoff@bmstu.ru
Russian Federation, Moscow
S. Yu. Shevchenko
Moscow State Technical University im. N. E. Baumana
Email: smirnoff@bmstu.ru
Russian Federation, Moscow
V. S. Shchipunov
”OK-LOZA” JSC
Email: smirnoff@bmstu.ru
Russian Federation, Sergiev Posad
V. E. Kunyaev
”OK-LOZA” JSC
Email: smirnoff@bmstu.ru
Russian Federation, Sergiev Posad
G. S. Seval’nev
Moscow State Technical University im. N. E. Baumana; I. P. Bardin Central Scientific Research Institute of Ferrous Metallurgy
Email: smirnoff@bmstu.ru
Russian Federation, Moscow; Moscow
Supplementary files
