Updating the Mode of Annealing of Tubes from Steel ShKh15 in Chamber Furnaces
- Authors: Yur’ev B.P.1, Gol’tsev V.A.1
-
Affiliations:
- Ural Federal University after the First President of Russia B. N. Eltsyn
- Issue: Vol 58, No 7-8 (2016)
- Pages: 421-425
- Section: Heat Treatment
- URL: https://journals.rcsi.science/0026-0673/article/view/234999
- DOI: https://doi.org/10.1007/s11041-016-0028-2
- ID: 234999
Cite item
Abstract
A study of commercial tubes from steel ShKh15 produced in a chamber furnace is performed for investigating the active annealing process. The causes of inappropriate heating and cooling of tubes in a charge are determined. The annealing mode is shown to mismatch the required temperature regime, which elevates rejection. Recommendations for eliminating the determined drawbacks, raising the quality of the annealed tubes and the output of the chamber furnaces are developed.
About the authors
B. P. Yur’ev
Ural Federal University after the First President of Russia B. N. Eltsyn
Author for correspondence.
Email: v.a.goltsev@urfu.ru
Russian Federation, Ekaterinburg
V. A. Gol’tsev
Ural Federal University after the First President of Russia B. N. Eltsyn
Email: v.a.goltsev@urfu.ru
Russian Federation, Ekaterinburg
Supplementary files
