Production of the Moscow plant "KOMPRESSOR"
- Authors: Silman M.A.
- Issue: Vol 89, No 12 (2000)
- Pages: 16-17
- Section: Articles
- URL: https://journals.rcsi.science/0023-124X/article/view/107724
- DOI: https://doi.org/10.17816/RF107724
- ID: 107724
Cite item
Full Text
Abstract
The plant produces a wide range of shell-and-tube heat exchange equipment. First of all, these are ammonia and freon horizontal condensers and evaporators. These devices are used to complete the complex compression refrigerating machines manufactured by the plant, and are also supplied to customers as independent products.
Full Text
##article.viewOnOriginalSite##About the authors
M. A. Silman
Author for correspondence.
Email: info@eco-vector.com
Candidate of Technical Sciences
Russian FederationReferences
Supplementary files
Supplementary Files
Action
1.
JATS XML
2.
Rice. 1. Shell and tube horizontal ammonia condenser: 1 ammonia vapor inlet pipe; 2 branch pipe to the equalizing line; 3 - safety valve; 4 - pressure gauge; 5 - branch pipe for venting air from the annulus; 6 - branch pipe for venting air from the pipe space; 7 - branch pipe for the outlet of cooling water; 8 - branch pipe for the inlet of cooling water; 9 - branch pipe for draining water from the pipe space; 10 - branch pipe for liquid ammonia outlet: 11 - oil drain pipe
Download (617KB)
3.
Fig.2. Shell-and-tube horizontal flooded type ammonia evaporator: 1 - branch pipes for the level indicator; 2 - branch pipe for supplying liquid ammonia; 3 - branch pipe for the outlet of ammonia vapor; 4 - branch pipe to the pressure gauge; 5 - branch pipe for the safety valve; 6 - branch pipe for venting air from the pipe space; 7 - outlet pipe of the carrier; 8 - coolant inlet pipe; 9 - coolant drain pipe; 10 - oil drain pipe; 11 - branch pipe to the drainage receiver
Download (627KB)
