Thickness of the Modified Polymer Layer Formed by Low-Temperature Plasma Treatment
- Authors: Gilman A.B.1, Piskarev M.S.1, Kuznetsov A.A.1
-
Affiliations:
- Enikolopov Institute of Synthetic Polymer Materials, Russian Academy of Sciences
- Issue: Vol 57, No 5 (2023)
- Pages: 400-403
- Section: PLASMA CHEMISTRY
- URL: https://journals.rcsi.science/0023-1193/article/view/140013
- DOI: https://doi.org/10.31857/S0023119323050030
- EDN: https://elibrary.ru/LIFROI
- ID: 140013
Cite item
Abstract
Experimental data presented in the literature on the depth of processing of polymer films using low-temperature plasma are considered. Changes in the chemical composition and structure along the depth of the samples have been studied using the modern experimental techniques of X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and transmission electron microscopy; precision etching was carried
out with an Ar+2500 cluster beam; and the pit depth was measured by profilometry. It has been found that the thickness of the modified layer is ≤50 nm and depends relatively little on the polymer nature.
About the authors
A. B. Gilman
Enikolopov Institute of Synthetic Polymer Materials, Russian Academy of Sciences
Email: plasma@ispm.ru
Moscow, 117393 Russia
M. S. Piskarev
Enikolopov Institute of Synthetic Polymer Materials, Russian Academy of Sciences
Email: plasma@ispm.ru
Moscow, 117393 Russia
A. A. Kuznetsov
Enikolopov Institute of Synthetic Polymer Materials, Russian Academy of Sciences
Author for correspondence.
Email: plasma@ispm.ru
Moscow, 117393 Russia
References
- Oehr C., Wertheimer M.R. // Plasma Proc. Polym. 2022. V. 19. 2277025.
- Tudoran C., Roşu M-C., Coroş M. // Plasma Proc. Polym. 2020. V. 17. № 8. 2000046.
- Weltmann K.-D., Kolb J.F., Holub M., Uhrlandt D. et al. // Plasma Proc Polym: Spec. Iss. The Future of Plasma Science, 2019. V. 16. № 1. 1800118.
- Cvelbar U., Walsh J.L., Černák M., de Vries H.W. et al. // Plasma Proc Polym: Spec. Iss. The Future of Plasma Science, 2019. V. 16. № 1. 1700228.
- Bekeschus S., Favia P., Robert E., Von Woedtke T. // Plasma Proc Polym: Spec. Iss. The Future of Plasma Science. 2019. V. 16. № 1. 1800033.
- Iqbal M., Dinh D.K., Abbas Q., Imran M., Sattar H., Ahmad A.U. // Surfaces. 2019. V. 2. P. 349.
- Modification of Polymer Properties / Eds. C.F. Jasso-Gastinel, J.M. Kenny, 2017. William Andrew. 232 p.
- Plasma Science and Technology – Progress in Physical States and Chemical Reactions / Ed. by Mieno T., 2016. InTech. 574 p.
- Desmet T., Morent R., De Geyter N., Leys C., Schacht E., Dubruel P. // Biomacromolecules. 2009. V. 10. P. 2351.
- Кутепов А.М., Захаров А.Г., Максимов А.И. Вакуумно-плазменное и плазменно-растворное модифицирование полимерных материалов. 2004. Москва: Наука. 496р.
- Энциклопедия низкотемпературной плазмы. / Вводный том IV. Под ред. Фортова В.Е., 2000. Москва: Наука. С. 393.
- Nakayama Y., Soeda F., Ishitani A., Ikegami T. // Polym. Eng. Sci. 1991. V. 31. № 11. P. 812.
- Яблоков М.Ю., Соколов И.И., Малиновская О.С., Гильман А.Б., Кузнецов А.А. // Химия высоких энергий. 2013. Т. 47. № 1. С. 76. [Yablokov M.Yu., Sokolov I.V., Malinovskaya O.S., Gilman A.B., Kuznetsov A. A. // High Energy Chem. 2013. V. 47. № 1. P. 32.]
- Cristaudo V., Collette S., Tuccitto N., Poleunis C., Melchiorre L.C., Licciardello A., Reniers F., Delcorte A. // Plasma Proc. Polym. 2016. V. 13. № 11. P. 1106.
- Corbella C., Pranda A., Portal S., delos Arcos T., Grundmeier G., Oehrlein G.S., von Keudell A. // Plasma Proc. Polym. 2019. V. 16. № 6. 1900019.
- Luan P., Oehrlein G.S. // Plasma Proc. Polym. 2019. V. 16. № 11. 1900053.
- Пискарев М.С., Скрылева Е.А., Сенатулин Б.Р., Гильман А.Б., Кузнецов А.А. // Химия высоких энергий. 2020. Т. 54. № 4. С. 325. [Piskarev M.S., Skry-leva E.A., Senatulin B.R., Gilman A.B., Kuznetsov A.A. // High Energy Chemistry. 2020. V. 54. № 4. P. 299.]
- Piskarev M., Skryleva E., Gilman A., Senatulin B., Zinoviev A., Syrtsova D., Teplyakov V., Kuznetsov A. // Coatings. 2021. V. 11. P. 1317.
Supplementary files
