Email this article Distribution of Stresses and Deformations in the Deformed Metal Volume at Indenting of a Spherical Indenter
- Authors: Matyunin V.M.1, Kazantsev A.G.2, Marchenkov A.Y.1
-
Affiliations:
- National Research University MPEI
- JSC TsNIITMASh
- Issue: Vol 54, No 15 (2018)
- Pages: 1517-1522
- Section: Mechanics of Materials: Strength, Resource, and Safety
- URL: https://journals.rcsi.science/0020-1685/article/view/158610
- DOI: https://doi.org/10.1134/S0020168518150116
- ID: 158610
Cite item
Open Access
Access granted
Subscription Access
Abstract
In this paper, we studied the distribution of stresses and deformations in a deformed metal under the indents obtained by indentation of a spherical indenter with a different degree of loading. For this purpose, the hardness method and the finite element method are used. These methods are shown to complement each other and their combined use gives more complete information on the values of stresses and strains in various zones of the deformed metal volume.
About the authors
V. M. Matyunin
National Research University MPEI
Author for correspondence.
Email: MatiuninVM@mpei.ru
Russian Federation, Moscow, 111250
A. G. Kazantsev
JSC TsNIITMASh
Author for correspondence.
Email: Kazantsev_a_g@mail.ru
Russian Federation, Moscow, 115085
A. Yu. Marchenkov
National Research University MPEI
Email: Kazantsev_a_g@mail.ru
Russian Federation, Moscow, 111250
Supplementary files
